Roughness of 3C-SiC thin film coating computer simulation
نویسندگان
چکیده
This paper deals with efficiency of weakly ionized gas-wall interaction which leads to follows: melting surface, clustering of vapor and melted charged drops nucleation to the solid phase. It shapes roughness of the surface coating.
منابع مشابه
Growth of Highly C-axis Oriented Aln Films on 3c-sic/si Substrate
For the first time, highly c-axis oriented heteroepitaxial AlN thin films have been successfully grown on epitaxial 3C-SiC films on Si (100) substrates. The AlN films deposited by the AC reactive magnetron sputtering at temperatures of approximately 300-450 °C were characterized using the scanning electron microscope (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and transmissio...
متن کاملDry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution
In this research, a thin film of TiO2 was applied on AZ91D using the method of magnetic sputtering. Microstructure investigations were done using field emission scanning electron microscope (FESEM) and X-ray diffraction (XRD). Wear resistance for the coating was investigated using the pin on the disk in the form of dry and in the Ringer's solution. After this test, the worn surface of the sampl...
متن کاملKinetic surface roughening and wafer bow control in heteroepitaxial growth of 3C-SiC on Si(111) substrates
A thin, chemically inert 3C-SiC layer between GaN and Si helps not only to avoid the "melt-back" effect, but also to inhibit the crack generation in the grown GaN layers. The quality of GaN layer is heavily dependent on the unique properties of the available 3C-SiC/Si templates. In this paper, the parameters influencing the roughness, crystalline quality, and wafer bow are investigated and engi...
متن کاملSimulation of Fabrication toward High Quality Thin Films for Robotic Applications by Ionized Cluster Beam Deposition
The most commonly used method for the production of thin films is based on deposition of atoms or molecules onto a solid surface. One of the suitable method is to produce high quality metallic, semiconductor and organic thin film is Ionized cluster beam deposition (ICBD), which are used in electronic, robotic, optical, optoelectronic devices. Many important factors such as cluster size, cluster...
متن کاملApplication of Taguchi design for optimization of corrosion behavior of amorphous silica thin film deposited through sol-gel dipping technique
Amorphous silica thin films were applied on the 316L stainless steel substrates by sol-gel dipping technique. The starting chemicals (TEOS, ethanol, HCl, PEG, and NaOH) were used to prepare a gel and then deposited on a substrate. The microstructure, topography, corrosion behavior, and surface hardness were investigated using SEM, AFM, electrochemical method, and micro-hardness measurements. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010