Response of Thin Films and Substrate to Micro-Scale Laser Shock Peening
نویسندگان
چکیده
Micro-scale laser shock peening LSP can potentially be applied to metallic structures in microdevices to improve fatigue and reliability performance. Copper thin films on a single-crystal silicon substrate are treated by using LSP and characterized using techniques of X-ray microdiffraction and electron backscatter diffraction (EBSD). Strain field, dislocation density, and microstructure changes including crystallographic texture, grain size and subgrain structure are determined and analyzed. Further, shock peened single crystal silicon was experimentally characterized to better understand its effects on thin films response to LSP. The experimental result is favorably compared with finite element method simulation based on single-crystal plasticity. DOI: 10.1115/1.2714568
منابع مشابه
Characterization of Heterogeneous Response of Al Bicrystal Subject to Micro Scale Laser Shock Peening
This letter shows the ability to perform characterization of the strain field in an aluminium bicrystal subject to plane strain condition induced by micro scale laser shock peening. Intensity contrast method, previously used in topographic measurements of strain fields in thin films is employed here. Our results show that this method is applicable for measurements of the plastically deformed bu...
متن کاملMicroscale Laser Shock Peening of Thin Films, Part 1: Experiment, Modeling and Simulation
Microscale Laser Shock Peening (LSP), also known as Laser Shock Processing, is a technique that can be potentially applied to manipulate residual stress distributions in metal film structures and thus improve the fatigue performances of micro-devices made of such films. In this study, microscale LSP of copper films on single crystal silicon substrate is investigated. Before and after-process cu...
متن کاملMicroscale Laser Shock Peening of Thin Films, Part 2: High Spatial Resolution Material Characterization
Microscale Laser Shock Peening (LSP) is a technique that can be potentially applied to manipulate the residual stress distributions in metal film structures and thus improve the reliability of micro-devices. This paper reports high-spatial-resolution characterization of shock treated copper thin films on single-crystal silicon substrates, where scanning x-ray microtopography is used to map the ...
متن کاملLongitudinal Magneto-Optical Kerr Effect in Ce:YIG Thin Films Incorporating Gold Nanoparticles
We report an experimental study on optical and magneto-optical properties of Cesubstituted yttrium iron garnet thin films incorporating gold nanoparticles. Au nanoparticles were formed by heating Au thin film on cubic quartz and garnet substrate in vacuum chamber and a Ce:YIG layer was deposited on them by the aid of Pulsed laser deposition method. A large enhancement of the longitudinal Kerr e...
متن کاملSpatially Resolved Characterization of Residual Stress Induced by Micro Scale Laser Shock Peening
Single crystal aluminum and copper of (001) and (110) orientation were shock peened using laser beam of 12 micron diameter and observed with X-ray micro-diffraction techniques based on a synchrotron light source. The X-ray micro-diffraction affords micron level resolution as compared with conventional X-ray diffraction which has only mm level resolution. The asymmetric and broadened diffraction...
متن کامل