Nanoporous LiNi(1/3)Co(1/3)Mn(1/3)O2 as an ultra-fast charge cathode material for aqueous rechargeable lithium batteries.
نویسندگان
چکیده
Nanoporous LiNi1/3Co1/3Mn1/3O2 (NP-NCM) was synthesized by using vapour grown carbon fibers (VGCFs) as templates. It exhibits excellent electrochemical performance as a cathode material for aqueous rechargeable lithium batteries, especially with ultra-fast charge capability, and 72 mA h g(-1) can be achieved at a charge time of 20 s.
منابع مشابه
Enhanced Li+ ion transport in LiNi0.5Mn1.5O4 through control of site disorder.
High voltage spinel LiNi(0.5)Mn(1.5)O(4) is a very promising cathode material for lithium ion batteries that can be used to power hybrid electrical vehicles (HEVs). Through careful control of the cooling rate after high temperature calcination, LiNi(0.5)Mn(1.5)O(4) spinels with different disordered phase and/or Mn(3+) contents have been synthesized. It is revealed that during the slow cooling p...
متن کاملIn Situ X-ray Absorption Studies of Cathode Materials for Rechargeable Lithium-Ion Batteries
Rechargeable batteries with high energy and power density are in great demand as energy sources for various purposes; e.g., portable telecommunication, computer equipment, hybrid electric vehicles, etc. Lithiumion batteries are the most promising candidates to fulfill such needs due to their intrinsic high discharge voltage and relatively light weight. The current commercial lithium-ion battery...
متن کاملLong-lived Aqueous Rechargeable Lithium Batteries Using Mesoporous LiTi2(PO4)3@C Anode
The instability of anode materials during cycling has been greatly limiting the lifetime of aqueous rechargeable lithium batteries (ARLBs). Here, to tackle this issue, mesoporous LiTi2(PO4)3@C composites with a pore size of 4 nm and a large BET surface area of 165 m(2) g(-1) have been synthesized by a novel two-step approach. The ARLB with this type of LiTi2(PO4)3@C anode, commercial LiMn2O4 ca...
متن کاملElectrode Materials for Lithium Ion Batteries: A Review
Electrochemical energy storage systems are categorized into different types, according to their mechanisms, including capacitors, supercapacitors, batteries and fuel cells. All battery systems include some main components: anode, cathode, an aqueous/non-aqueous electrolyte and a membrane that separates anode and cathode while being permeable to ions. Being one of the key parts of any new electr...
متن کاملNew Type of Alkaline Rechargeable Battery—Ni-Ni Battery
The feasibility of utilizing disordered Ni-based metal hydroxide, as both the anode and the cathode materials, in alkaline rechargeable batteries was validated for the first time. Co and Mn were introduced into the hexagonal Ni(OH)2 crystal structure to create disorder and defects that resulted in a conductivity increase. The highest discharge capacity of 55.6 mAh ̈g ́1 was obtained using a comme...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 49 80 شماره
صفحات -
تاریخ انتشار 2013