Chemical and electrical properties of LSM cathodes prepared by mechanosynthesis
نویسندگان
چکیده
Mechanosynthesis of La1-xSrxMnO3 (x = 0, 0.25, 0.5, 0.75 and 1) was carried out at room temperature from stoichiometric mixtures of La2O3, Mn2O3 and SrO, obtaining monophasic powders with the perovskite structure. Physical properties of these materials and their chemical compatibility with the electrolyte yttria stabilized zirconia (YSZ), which depend strongly on the La/Sr ratio, were evaluated to corroborate availability to be implemented as cathode material in solid oxide fuel cells (SOFCs). Electrical conductivity values in air ranged between 100–400 Scm in the temperature range of 25–850 °C. Samples presented low reactivity with YSZ in the working temperature range (600–1000 oC) maintaining the grain size small enough to preserve the catalytic activity for oxygen reduction.
منابع مشابه
The Effect of cathode Porosity on Solid Oxide Fuel Cell Performance
In the present study, the effect of porosity on the cathode microstructure (50:50 wt. % LSM: YSZ) of a Solid Oxide Fuel Cell (SOFC) has been examined. A 3-D finite element method for Mixed Ionic and Electronic Conducting Cathodes (MIEC) is presented to study the effects of porosity on cell performance. Each microstructure was realized using the Monte Carlo approach with the isotropic type o...
متن کاملNovel microstructural strategies to enhance the electrochemical performance of La0.8Sr0.2MnO3-δ cathodes.
Novel strategies based on spray-pyrolysis deposition are proposed to increase the triple-phase boundary (TPB) of La0.8Sr0.2MnO3-δ (LSM) cathodes in contact with yttria-stabilized zirconia (YSZ) electrolyte: (i) nanocrystalline LSM films deposited on as-prepared YSZ surface; (ii) the addition of poly(methyl methacrylate) microspheres as pore formers to further increase the porosity of the film c...
متن کاملMicroanalyses of Structure, Composition, and Morphology of the Surfaces and Interfaces in LSM-Infiltrated LSCF Cathodes
The work is supported by US DOE SECA Core Technology Program under Grant No. DENT-0006557. We thank SHaRE, ORNL for TEM instrumentation and sample preparation. One of the reasons that LaxSr1−xCoyFe1−yO3−δ (LSCF) based cathodes show much better performance than those based on LaxSr1-xMnO3-δ (LSM) is that LSCF has much higher ionic and electronic conductivities than LSM, significantly extending t...
متن کاملEffect of the Ionic Conductivity of the Electrolyte in Composite SOFC Cathodes
Solid oxide fuel cell (SOFC) cathodes were prepared by infiltration of 35 wt % La0.8Sr0.2FeO3 (LSF) into porous scaffolds of three, zirconia-based electrolytes in order to determine the effect of the ionic conductivity of the electrolyte material on cathode impedances. The electrolyte scaffolds were 10 mol % Sc2O3-stabilized zirconia (ScSZ), 8 mol % Y2O3-stabilized zirconia (YSZ), and 3 mol % Y...
متن کاملThe Effect of cathode Porosity on Solid Oxide Fuel Cell Performance
In the present study, the effect of porosity on the cathode microstructure (50:50 wt. % LSM: YSZ) of a Solid Oxide Fuel Cell (SOFC) has been examined. A 3-D finite element method for Mixed Ionic and Electronic Conducting Cathodes (MIEC) is presented to study the effects of porosity on cell performance. Each microstructure was realized using the Monte Carlo approach with the isotropic type of gr...
متن کامل