Stabilisation of SWNTs by alkyl-sulfate chitosan derivatives of different molecular weight: towards the preparation of hybrids with anticoagulant properties.

نویسندگان

  • Dimitrios G Fatouros
  • Kieron Power
  • Omar Kadir
  • Imre Dékány
  • Spyros N Yannopoulos
  • Nikolaos Bouropoulos
  • Aristides Bakandritsos
  • Milan D Antonijevic
  • George D Zouganelis
  • Marta Roldo
چکیده

We have previously demonstrated that chitosan derivative N-octyl-O-sulfate chitosan (NOSC), which presents important pharmacological properties, can suspend single walled carbon nanotubes (SWNTs) up to 20 times more effectively than other chitosan derivatives in an aqueous environment. In an attempt to further investigate the impact of different molecular weights of chitosan to the solubilization and anticoagulant properties of these hybrids an array of NOSC derivatives varying their molecular weight (low, medium and high respectively) was synthesised and characterised by means of FT-IR spectroscopy, NMR spectroscopy and thermal gravimetric analysis (TGA). Microwave and nitric acid purified SWNTs, characterised by FT-IR spectroscopy, transmission electron microscopy (TEM) and Raman spectroscopy, were colloidally stabilised by these polymers and their anticoagulant activity was assessed. The results revealed that the low molecular weight NOSC coated SWNTs exhibit the highest activity when 0.5 mg mL(-1) NOSC solutions are used, activity which is similar to that of the free polymer. Preliminary studies by exposure of these hybrids to Brine Shrimp (Artemia) cysts revealed no effect on the viability of sub-adult Artemia. Our findings suggest the possibility of tailoring these nanomaterials to bear the required properties for application as biocompatible building blocks for nanodevices including biosensors and biomaterials.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

مقایسه ی خواص ضد باکتری کیتین، کیتوزان و کیتوالیگومرهای به دست آمده از پوسته ی میگوی سفید سرتیز (Metapenaeus affinis )

Background and purpose: Chitin is one of the main components of crustaceans’ exoskeleton. Chitosan is produced by deacetylation of chitin. Molecular weight and degree of deacetylation play important roles in biological activity of chitin, chitosan, and their derivatives. So far, various derivatives of chitin and chitosan are obtained. The purpose of this study was to prepare derivatives o...

متن کامل

Novel biocompatible chitosan decorated single-walled carbon nanotubes (SWNTs) for biomedical applications: theoretical and experimental investigations.

Molecular mechanics and molecular dynamics simulations have been employed to characterise the interactions between SWNTs and biocompatible amphililic derivatives of chitosan, namely N-butyl-O-sulfate chitosan (NBSC), N-octyl-O-sulfate chitosan (NOSC) and N-palmitoyl-O-sulfate chitosan (NPSC). The computational simulations have shown that the affinity of the polymer for the hydrophobic surface o...

متن کامل

Alkyl cross-linked low molecular weight polypropyleneimine dendrimers as efficient gene delivery vectors

Objective(s): First, 10-bromodecanoic acid was covalently attached to all available surface primary amines of PPI G2 and G3 to increase their lipophilicity. In the subsequent step, PPIs were conjugated to the alkylcarboxylate groups of alkylcarboxylate-PPI derivatives to increase the number of surface primary amines. Physicochemical properties of modified PPIs were determined. Transfection expe...

متن کامل

Effect of chitosan on the mold resistance of wood and its surface properties

In this study, the effect of soluble chitosan, thyme oil and linseed oil on the mold resistance of wood and its surface properties was investigated. Both low and medium molecular weight chitosan with concentration of 1 and 2% were used. Cypress wood samples with dimensions of 20 × 20 × 70 mm and moisture content of 12% were saturated by the preservatives. The results showed that the maximum abs...

متن کامل

In vitro biocompatibility of low and medium molecular weight chitosan–coated Fe3O4 nanoparticles

Objective(S): The chitosan - Fe3O4 core - shell nanoparticles were synthesized. The nanoparticles should be coated properly in the shape of core-shell, so that they remain hidden from the body's immune system after coating. Effects of different molecular weight in coating were investigated. Methods: Nanoparticles coated with low and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nanoscale

دوره 3 3  شماره 

صفحات  -

تاریخ انتشار 2011