Automatic calibration of modulated fractional-N frequency synthesizers

The focus of this research has been the development of a low power, radio frequency transmitter architecture. Specifically, a technique for in service automatic calibration of a modulated phase locked loop (PLL) frequency synthesizer has been developed. Phase/frequency modulation is accomplished by modulating the feedback divide value in a phase locked loop frequency synthesizer. A digital precompensation filter is used to extend the modulation bandwidth by canceling the lowpass transfer function of the PLL. The automatic calibration circuit maintains accurate matching between the digital precompensation filter and the analog PLL transfer function across process and temperature variations. The automatic calibration circuit, which is the main contribution of this thesis, operates while the transmitter is in service. This online calibration eliminates the need for production calibration and periodic down time for calibration cycles. In addition the calibration circuitry provides greater accuracy in the modulation than what is possible via offline methods of calibration. The calibration circuit works with M-ary GFSK as well as 2 level GFSK. The automatic calibration circuit has been implemented in two forms to prove its operation. The first version is a circuit board level implementation with a center frequency of around 60 MHz. The second implementation of the system is in a full custom 0.6 μm BiCMOS integrated circuit. The integrated circuit contains the complete synthesizer with automatic calibration and operates in the 1.88 GHz frequency band used by the Digital European Cordless Telephone (DECT) standard. A data rate of 2.5 Mbps using 2 level GFSK and 5.0 Mbps using 4 level GFSK has been achieved with a power consumption of 78 mW. Thesis Supervisor: Charles G. Sodini Title: Professor of Electrical Engineering