UV-Curable Aliphatic Silicone Acrylate Organic-Inorganic Hybrid Coatings with Antibacterial Activity.
نویسندگان
چکیده
The most effective means to protect against bacterial invasion and to reduce the risk of healthcare-associated infections are antibacterial components synthesis. In this study, a novel process for the synthesis of organic-inorganic hybrid coatings containing silver nanoparticles is presented. Silver nanoparticles and polymer formation proceeds simultaneously through the in situ photoreduction of silver salt to silver nanoparticles and UV-crosslinking of bifunctional aliphatic silicone acrylate. The nanocomposite films with 0.5-1.43 wt % of silver nanoparticles concentration were obtained and investigated. The formation of silver nanoparticles in polymer matrix was confirmed via UV-visible spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy, scanning electron spectroscopy, and energy dispersive spectroscopy. Our investigations clearly show the formation of silver nanoparticles in silicone acrylate network. Direct photoreduction of silver salt by UV-radiation in the organic media produced silver nanoparticles exhibiting cubic crystal structure. The size of nanoparticles was determined to be near 20 ± 5 nm. The antibacterial activities of coatings were determined using the disc diffusion and direct contact methods. UV-curable silicone acrylate hybrid coatings exhibited antibacterial activity against harmful bacteria strains.
منابع مشابه
Hybrid glass coatings for optical fibers: effect of coating thickness on strength and dynamic fatigue characteristics of silica fibers
Specialty optical fibers operating in harsh aerospace environments are typically exposed to high temperatures and elevated humidity. This calls for better performing protective coatings. Recently developed sol-gel derived inorganicorganic hybrid materials called hybrid glass offered improved protective performance as compared to standard dual polymer coated fibers [1]. In this paper we examine ...
متن کاملStudy the curing behavior and mechanical properties of Pigmented UV curable epoxy acrylate monomers
The formulations contained different acrylate monomer with different structure and functionalities and TiO2, were applied to obtain pigmented acrylic films by UV exposure. The conversion and mechanical characteristic were correlated. The results showed that there is a significant interaction between pigment, reactive diluents’ type and mechanical properties of coatings. It seems that cured film...
متن کاملThermal Conductivity and Viscoelastic Properties of UV-curable Urethane Acrylate Reinforced with Modified Al2O3 Nanoparticles
In this study, UV-curable urethane acrylate UA synthesized and then characterized by FTIR and HNMR. For better dispersion of nanoparticles in polymeric matrix, nano Al2O3 was modified by silane coupling agent and then its nanocomposites were prepared. The characteristics of synthesized nanocomposites were analyzed by TGA, DMA and infrared thermography. The results signify that adding nano Al2O3...
متن کاملFabrication and study of structural, optical and electrical properties of UV curable conductive polyurethane acrylate films containing polyaniline-Co3O4 nanocomposites
In this research, Novel UV curable conductive nanocomposites containing urethane acrylate and PANi-Co3O4 nanocomposite have been prepared. At first, PANi- Co3O4 nanocomposites have been synthesized and then PUA-PANi-Co3O4 nanocomposites films were prepared by ultraviolet radiation. UV-Vis and FT-IR studies confirm that there was strong chemical interaction between PANi and Co3O4 nanoparticles, ...
متن کاملDesign and UV-curable behaviour of boron based reactive diluent for epoxy acrylate oligomer used for flame retardant wood coating
Difunctional boron-containing reactive flame retardant for UV-curable epoxy acrylate oligomer was synthesized from phenyl boronic acid and glycidyl methacrylate. The synthesized reactive diluent was utilized to formulate ultraviolet (UV)-curable wood coatings. The weight fractions of reactive diluent in coatings formulation was varied from 5 to 25 wt % with constant photoinitiator concentration...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Molecules
دوره 22 6 شماره
صفحات -
تاریخ انتشار 2017