Fe-doped SnO2 obtained by mechanical alloying
نویسندگان
چکیده
In this work, iron-doped SnO2 powders were prepared by two methods: mechanical alloying and mechanochemical alloying with successive thermal treatment. The influence of different milling conditions such as ball to powder weight ratio, milling time, rotation velocity of supporting disc and the type of iron starting reactive and their Fe concentration on the structural and magnetic properties of the products were investigated. A greater incorporation of Fe in the SnO2 structure was observed when the samples were prepared by using mechanochemical alloying and successive thermal treatment. r 2008 Elsevier Ltd. All rights reserved.
منابع مشابه
Photocatalytic degradation of methylene blue by 2 wt.% Fe doped TiO2 nanopowder under visible light irradiation
In this paper, 2wt.% Fe doped TiO2 nanopowder was prepared by a combination of sol-gel and mechanical alloying methods. The mechanical alloying of Fe powder with Ti(OH)4 gel produced from the sol-gel method was used to produce Fe doped TiO2 nanopowder. The synthesized samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and diffuse reflectan...
متن کاملMagnetic Properties and Oxygen Defects of Dilute Metal Doped Tin Oxide Based Semiconductor
Chemical and magnetic states of iron doped tin oxide (SnO2) as a diluted magnetic semiconductor (DMS) at room temperature have been investigated using 57Fe Mössbauer spectrometry, XRD and magnetometery. The influence of the doping conditions of SnO2 with iron on the generation of oxygen defects was reviewed and discussed on the basis of ab initio calculations. The magnetic properties depended o...
متن کاملCharacterization of the metastable Cu-Fe nanoparticles prepared by the mechanical alloying route
Although Cu and Fe are immiscible under equilibrium conditions, they can form supersaturated solid solutions by mechanical alloying. In this paper, nano-structured of the metastable Cu-Fe phase containing 10, 15, 20 and 25% wt Fe were synthesized by intensive ball milling for 15h, in order to achieve a solid solution of Fe in Cu. The phase composition, dissolution of the Fe atoms into the Cu ma...
متن کاملProduction of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying
In this research, the production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying was investigated and evaluated. Ferrotitanium (containing 70%Ti), titanium and graphite were used as the raw materials. Initial mixtures were milled in different time durations under the pure nitrogen atmosphere with the pressure of 5atm. The results showed that when N2 pressure is 5 at...
متن کاملProduction of Fe-C Powders with Improved Structure
Production of Fe-C alloy powders by mechanical alloying was studied. Fe and graphite elemental powder mixtures containing 0.8 and 1.5wt.% graphite were mechanically alloyed using a planetary ball mill. The structural changes of powder particles during mechanical alloying were studied by x-ray diffractometery, scanning electron microscopy and microhardness measurements. For both compositions, me...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Microelectronics Journal
دوره 39 شماره
صفحات -
تاریخ انتشار 2008