Simplified measurement-based black-box modeling of distribution transformers using transfer functions
نویسندگان
چکیده
Modeling of power distribution transformers in the high-frequency range is of crucial importance in cases such as using power-line communication technology or investigating transient overvoltages at the transformer low-voltage side. This paper presents a simple black-box modeling methodology for distribution transformers using transfer functions defined by the recorded voltage ratios at the transformer terminals. The model parameters are estimated using an optimization method that minimizes the error between the measured and the calculated data. A significant advantage of the proposed methodology is the use of conventional instruments in conducting the measurements rather than high-precision and expensive equipment. The accuracy of the developed model is verified by its implementation in both frequencyand time-domain simulations. © 2014 Elsevier B.V. All rights reserved.
منابع مشابه
Transformer Modeling Based on Standard Frequency Response Measurements
High frequency models of large power transformers are required for analysis of transient interaction phenomena between transformers and the power system. Fast transient overvoltages may lead to transformer dielectric failures. Deeper understanding of the mechanisms may help to take actions against possible damages. This paper describes the simulation principle of transient interaction in matter...
متن کاملPMU-Based Matching Pursuit Method for Black-Box Modeling of Synchronous Generator
This paper presents the application of the matching pursuit method to model synchronous generator. This method is useful for online analysis. In the proposed method, the field voltage is considered as input signal, while the terminal voltage and active power of the generator are output signals. Usually, the difference equation with a second degree polynomial structure is used to estimate the co...
متن کاملStress Transfer Modeling in CNT Reinforced Composites using Continuum Mechanics (TECHNICAL NOTE)
Because of the substantial difference in stiffness between matrix and nanotube in CNT composite, the stress transfer between them controls their mechanical properties. This paper investigates the said issue, analytically and numerically, in axial load using representative volume element (RVE). The analytical model was established based on the modified Cox’s shear lag model with the use of some ...
متن کاملLong-term Planning of Optimal Placement of Distribution Transformers to Improve Reliability and Power Quality with the Approach of Reducing Costs and Losses
One of the most critical and complex issues in long-term planning of distribution networks is the optimal placement of distribution transformers. In this paper, the optimal placement of distribution transformers was investigated based on a complete and multi-objective function. In the proposed method, location, optimal capacity, and the service area are determined by minimizing costs (investmen...
متن کاملClassification of transformer faults using frequency response analysis based on cross-correlation technique and support vector machine
One of the most important methods for transformers fault diagnosis (especially mechanical defects) is the frequency response analysis (FRA) method. The most important step in the FRA diagnostic process is to differentiate the faults and classify them in different classes. This paper uses the intelligent support vector machine (SVM) method to classify transformer faults. For this purpose, two gr...
متن کامل