E F G Actual Model of Wiper System Perception of Wiper System Mathematical Model of Wiper System Response of Wiper System
نویسنده
چکیده
Wiper is a device to wipe out dirt and raindrops from the windscreen. Hence, when a wiper system is operated, it has a potential to generate unwanted noise and vibration level. Reversal is one of the noise and vibration generated during the wiper operations. It is a medium frequency and self excited vibration that is often generated before and vice versa the direction. This leads to poor visibility and annoying sound to the driver and passengers. This paper investigates the effect of friction coefficient on vibration response in the wiper assembly. The adjusted values of friction have been made in order to reduce the noises and vibrations level. Besides, an input shaping (IS) control technique is proposed to reduce the reversal noises and vibrations level in this wiper system. A two dimensional mathematical model of wiper system is used in this analysis which shows that the noise and vibration level can be reduced up to 30 percents.
منابع مشابه
Kinematic and Dynamic Analysis of the Windshield Wiper Mechanisms Used for Motor Vehicles
In this paper we attempt to analyze and simulate the windshield wiper mechanisms, using the multibody systems software ADAMS. The design algorithm involves three mechanical models: kinematic model – to performe the positional analysis of the wiper system, inverse dynamic model – to determine the torque applied to the motor crank in order to generate the kinematically-prescribed behavior, and dy...
متن کاملDesign Algorithm of the Windshield Wiper Mechanisms of the Passenger Vehicles
In this paper, we attempt to present the design algorithm of the windshield wiper mechanisms. In order to analyze the windshield wiper mechanisms, three mechanical models are developed: kinematic model – to evaluate and optimize the kinematic function of the mechanism; inverse dynamic model – to determine the crank turning torque applied to the input element in order to generate the kinematical...
متن کاملApplication of dither control for automotive wiper squeal
This paper describes a feasibility study on dither control for automotive wiper squeal. Wiper squeal is a tonal noise caused by an unstable vibration due to the friction between wiper blade and windscreen. Dither control is the superposition of a high-frequency signal, in this case a high-frequency vibration, to stabilize a low-frequency unstability in a system. A finite element model of the wi...
متن کاملAn Efficient Low Cost Wiper System for Autonomous Vehicle
The traditional wiper system requires driver’s attention to switch on the wiper system during precipitation. Whereas in traffic condition, driver should not be diverted by manual adjustment of switching the wiper system which may leads to accident. Probably 80% of accidents are mainly due to distraction of driver. In this scenario we need to obtain an automatic wiping on the wind screen during ...
متن کاملPractical multi-objective controller for preventing noise and vibration in an automobile wiper system
This paper presents an approach using a multi-objective controller to prevent noise and vibration generated by the wiper blade during its wiping operation. Firstly, this paper focuses on the experimental approach to collect noise and vibration data from a car wiper system during its operation and secondly, to develop black box model of the wiper system using nonparametric approach of system ide...
متن کامل