Nylon 6 electrospun nanofibers mat as effective sorbent for the removal of estrogens: kinetic and thermodynamic studies
نویسندگان
چکیده
Nylon 6 electrospun nanofibers mat was prepared via electrospinning for the removal of three estrogens, namely, diethylstilbestrol (DES), dienestrol (DS), and hexestrol (HEX) from aqueous solution. Static adsorption as well as the dynamic adsorption was evaluated by means of batch and dynamic disk flow mode, respectively. The kinetic study indicated that the adsorption of the target compounds could be well fitted by the pseudo-second-order equation, suggesting the intra-particle/membrane diffusion process as the rate-limiting step of the adsorption process. The adsorption equilibrium data were all fitted well to the Freundlich isotherm models, with a maximum adsorption capacity values in the range of 97.71 to 208.95 mg/g, which can be compared to or moderately higher than other sorbents published in the literatures. The dynamic disk mode studies indicated that the mean removal yields of three model estrogens were over 95% with a notable smaller amount of adsorbent (4 mg). Thermodynamic study revealed that the adsorption process was exothermic and spontaneous in nature. Desorption results showed that the adsorption capacity can remain up to 80% after seven times usage. It was suggested that Nylon 6 electrospun nanofibers mat has great potential as a novel effective sorbent material for estrogens removal.
منابع مشابه
Kinetic and thermodynamics analysis: effect of eudragit polymer as drug release controller in electrospun nanofibers
The purpose of the present study was investigating kinetic and thermodynamic analysis using eudragit (EUD) polymer as controller to drug release mebendazole. nanofibers containing various proportions of EUD polymer, that were prepared with electrospinning technique. In this study, the amount of drug mebendazole release was investigated using nanofibers containing EUD at concentrations 50, 250,...
متن کاملApplication of guar gum in electrospun nanofibers as mebendazole drug release controller: a kinetic study and thermodynamics analysis
The current study aimed at in vitro investigating the kinetic study and thermodynamic analysis of mebendazole drug released from electrospun cellulose nanofiber in which guar gum is used as a release controller. The nanofibers were fabricated by electrospinning technique. The fibers were boosted by different controller guar gum 10 at 50, 250, and 500 ppm concentrations. The drug releas...
متن کاملGenipin cross-linked electrospun chitosan-based nanofibrous mat as tissue engineering scaffold
Objective(s): To improve water stability of electrospun chitosan/ Polyethylene oxide (PEO) nanofibers, genipin, a biocompatible and nontoxic agent, was used to crosslink chitosan based nanofibers. Materials and Methods: Different amounts of genipin were added to the chitosan/PEO solutions, chitosan/PEO weight ratio 90/10 in 80 % acetic acid, and the solutions were then electrospun to form nano...
متن کاملElectrospun nylon 6,6 nanofibers functionalized with cyclodextrins for removal of toluene vapor
Functional nylon 6,6 nanofibers incorporating cyclodextrins (CD) were developed via electrospinning. Enhanced thermal stability of the nylon 6,6/CD nanofibers was observed due to interaction between CD and nylon 6,6. X-ray photoelectron spectroscopy and attenuated total reflectance Fourier transform infrared spectroscopy studies indicated the existence of some CD molecules on the surface of the...
متن کاملDrug release rate and kinetic investigation of composite polymeric nanofibers
Objective(s): In this work, electrospun nanofibers were explored as drug delivery vehicles using tetracycline as a model drug. Nanocomposite fibers including chitosan (CS)/poly (ethylene oxide) (PEO) and antibiotic were successfully prepared using electrospinning. CS blended with PEO considering a weight ratio of (90/10), and then, nanofibrous samples were successfully e...
متن کامل