Solutions to Corrosion Caused by Agricultural Chemicals

نویسندگان

  • B. Eker
  • E. Yuksel
چکیده

Corrosion is the deterioration of materials by chemical interaction with their environment. The consequences of corrosion are many and varied. The effects of these on the safe, reliable and efficient operation of equipment or structures are often more serious than the simple loss of a mass of metal. The two main reasons for replacing machinery or equipment include upgrading old equipment and substituting them because of wear and corrosion. Discussions with people in this sector placed corrosion costs in the range of five to ten percent of the value of all new equipment. Furthermore, many commercial chemicals are used on farmlands, grain and silage preservatives, pests and weed control, and as proprietary acid solutions for cleaning dairy equipment. In addition to these, farm wastes and slurries contain many chemicals. On the whole, these various chemicals frequently damage farming machinery and ancillary structures. The aim of this discussion is to proffer suitable solutions to corrosion occurring due to actions of these agricultural chemicals.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fractographic Aspects of Stress Corrosion Failure of Zircaloy 2 in CH3OH HCL Solutions

Fracture surface of Zircaloy-2 specimens tested under constant crosshead speed in CH3OH/0.4 Vol. %HCI solution with and without selenium (25 ppm) addition was studied. Using a combined process of deformation and annealing, coarse grained material was also obtained and examined. Two modes of stress corrosion crack propagation were observed: an intergranular zone caused by stress assisted anodic ...

متن کامل

THE EFFECT OF OILFIELD CHEMICALS ON THE SURFACE TENSION OF SURFACTANT SYSTEMS

Treated sea water is the most significant source of water and surfactant floods. The various chemicals employed in treatment plants should be compatible with surfactant systems. Based on surface tension experiments, the activity of these chemicals is examined over a wide range of concentrations in different solutions, including distillated water, sea water by using three types of surfactant mix...

متن کامل

Behavior of Steels against Corrosion in Peroxide Solutions

Environment safety measurements have resulted in use of peroxide as bleaching chemical in place of chlorine and chlorine dioxide. Concentration and composition of chemicals affects corrosion aspects, the suitability of existing plant metallurgy and materials of construction of bleach plants. Accordingly long term immersion and electrochemical corrosion tests were conducted on stainless steel 30...

متن کامل

Dealloying and Stress Corrosion Craking of Copper Alloys in Cu(I) Solutions

Natural cases of dealloying or stress-corrosion cracking in copper alloys normally occur in oxygenated solutions, where the cathodic reactant is O2 or Cu2+. Within cavities or under deposits, the local environment is enriched in cuprous ions (e.g. CuCl2-, Cu (NH3)2+) and the potential is close to the Cu/Cu+ equilibrium. Such conditions can be simulated macroscopically by stirring powdered Cu2O ...

متن کامل

New possibilities of metal corrosion inhibition by organic heterocyclic compounds

It is shown that many heterocyclic organic compounds, e.g., various azoles, are capable of adsorption on metals with formation of strong bonds with the surface. The approach based on the linear free energy relationship (LFER) principle offers a description of the efficiency of corrosion inhibition by these compounds and provides an understanding of the nature of chemical bonds formed by an orga...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006