Desktop Micro Forming System for Micro Pattern on the Metal Substrate
نویسندگان
چکیده
In this Research, the desktop micro forming manufacturing system has been developed. A micro forming system has been achieved in Japan and its developed micro press is limited to single forming process. To coincide with the purpose to be more practical, research and development is necessary about the press which the multi forming process is possible. Micro patterned metal components are used in so many precision engineering fields. This micro pattern plays an important part in the functional movement of precision module. This micro pattern on the metal component can be made by EDM(Electro Discharge Machining). But this EDM method has low productivity because EDM tools can be worn easily. If another manufacturing process is developed with high productivity, industries can product the competitive goods. So we research on the forming process and system to make micro functional pattern on the metal component.
منابع مشابه
Research on the Micro Pattern forming of Spiral Grooves in a Dynamic Thrust Bearing
This paper deals with a novel technique for the fabrication of Spiral grooves in a dynamic thrust bearing. The main scheme proposed in this paper is to fabricate the microgrooves using desktop forming system. This process has advantages compared to the conventional electro-chemical machining in the viewpoint of a higher productivity. For this reason, a new testing apparatus is designed and buil...
متن کاملCrack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...
متن کاملInvestigation on Forming of Titanium Bipolar Plates Using Micro-stamping Process
Micro-stamping process is one of the most cost-effective methods to manufacture metallic bipolar plates (BPPs). This research investigates the forming of titanium thin sheet as a potential candidate for BPPs in proton exchange membrane fuel cell (PEMFC). In this regard, the process was first simulated using finite element (FE) code Abaqus. Afterward, experimental tests were implemented and the ...
متن کاملMicro Machining of Injection Mold Inserts for Fluidic Channel of Polymeric Biochips
Recently, the polymeric micro-fluidic biochip, often called LOC (lab-on-a-chip), has been focused as a cheap, rapid and simplified method to replace the existing biochemical laboratory works. It becomes possible to form miniaturized lab functionalities on a chip with the development of MEMS technologies. The micro-fluidic chips contain many micro-channels for the flow of sample and reagents, mi...
متن کاملPrinted two-dimensional micro-zone plates for chemical analysis and ELISA.
In this study we report a new concept of printing low-cost two-dimensional micro-zone plates for chemical and biochemical assays and ELISA. It is different from the concept of forming multi-zone micro-zones on paper by hydrophobic barriers first reported by Yagoda. Instead, the desired multi-zone micro-zone pattern was first printed using a UV-curable varnish onto a polymer film; then fine powd...
متن کامل