A Performance Prediction Method with an Equation-Based Behavioral Model for a Single-Bit Single-Loop Sigma-Delta Modulator

An equation-based behavioral model has been developed to predict the real performance of a single–loop single-bit Sigma Delta Modulator (SDM). By using this prediction flow, not only can the circuit specifications be acquired, including the gain, bandwidth, slew rate of the OPAMPs, and the capacitor value in the switchedcapacitor circuits, but the real performance of the SDM can also be predicted. The switched-capacitor circuits according to the required circuit specifications are employed to design a fourth-order feed-forward (FF) SDM with an over-sampling ratio (OSR) of 64 and a bandwidth of 10kHz using a TSMC 0.35μm CMOS process. The measurement results reveal that the SDM with an input frequency of 2.5kHz and a supply voltage of 3.3V can achieve a dynamic range of 90dB and a spurious-free dynamic range (SFDR) of 85dB under the signal bandwidth of 10kHz and a sampling frequency of 1.28MHz, respectively. The precision of the equation-based behavioral model has been validated by experimental measurements, and its inaccuracy is less than 4%. A Performance Prediction Method with an EquationBased Behavioral Model for a Single-Bit Single-Loop Sigma-Delta Modulator