Hot and solid gallium clusters: too small to melt.
نویسندگان
چکیده
A novel multicollision induced dissociation scheme is employed to determine the energy content for mass-selected gallium cluster ions as a function of their temperature. Measurements were performed for Ga(+)(n) (n=17 39, and 40) over a 90-720 K temperature range. For Ga+39 and Ga+40 a broad maximum in the heat capacity-a signature of a melting transition for a small cluster-occurs at around 550 K. Thus small gallium clusters melt at substantially above the 302.9 K melting point of bulk gallium, in conflict with expectations that they will remain liquid to below 150 K. No melting transition is observed for Ga+17.
منابع مشابه
Flow simulation of gallium in a cylindrical annulus in the presence of a magnetic field for improving the casting process
Free convection flow in an enclosure filled with a congealing melt leads to the product with a nonuniform structure involving large grains. The convective flows are decreased by applying an appropriate magnetic field, obtaining uniform and small grain structures. In this work, using the finite volume method, we investigated the application of a magnetic field to the convective heat transfer and...
متن کاملNatural convection solid/liquid phase change in porous media
A combined numerical and experimental study is reported of solid/liquid phase change in porous media with natural convection in the melt region. The model is based on volume averaged transport equations, while phase change is assumed to occur over a small temperature range. Experiments are performed in a vertical, square enclosure using gallium and glass beads as the fluid and the porous matrix...
متن کاملMelting, freezing, sublimation, and phase coexistence in sodium chloride nanocrystals.
Calorimetry measurements, performed by multicollision induced dissociation, have been used to probe the melting of a number of (NaCl)nNa+ clusters with n=22-37. The clusters anneal at 225-325 K and melt at 750-850 K. (NaCl)22Na+ and (NaCl)37Na+, which can adopt geometries that are perfect fragments of the bulk lattice melt at around 850 K. The other clusters, which (except for n=31) must have d...
متن کاملFormulation and Characterization of Solid Dispersion Prepared by Hot Melt Mixing: A Fast Screening Approach for Polymer Selection
Solid dispersion is molecular dispersion of drug in a polymer matrix which leads to improved solubility and hence better bioavailability. Solvent evaporation technique was employed to prepare films of different combinations of polymers, plasticizer, and a modal drug sulindac to narrow down on a few polymer-plasticizer-sulindac combinations. The sulindac-polymer-plasticizer combination that was ...
متن کاملHot Melt Extrusion Technique
Various approaches have been adopted to address this including preparation of solid dispersions and solid solutions. Hot-melt extrusion is an efficient technology for producing solid molecular dispersions with considerable advantages over solvent-based processes such as spray drying and co-precipitation. Hot-melt extrusion has been demonstrated to provide sustained, modified, and targeted drug ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 91 21 شماره
صفحات -
تاریخ انتشار 2003