Concurrent Growth of Kirkendall Pores and Vapor–Solid–Solid Protuberances on Ni Wires During Mo Vapor-Phase Deposition
نویسنده
چکیده
During vapor-phase deposition at 1273 K (1000 C), by pack cementation, of Mo onto 127-lmdiameter Ni wires, two phenomena are observed to occur concurrently, leading to strong surface roughening: (i) the inward radial growth of Kirkendall pores below the wire surface and (ii) the outward growth from the wire surface of protuberances with sizes as large as 15 lm. Highaspect-ratio Kirkendall pores as long as 21 lm are created because of imbalanced interdiffusion between Mo and Ni. These pores in turn, by reducing the flow of Mo into the wires, may enhance the outward growth of Mo-rich protuberances, further roughening the wire surface. These protuberances have faceted tips as well as terraces and steps, indicating that their growth is governed by the vapor–solid–solid mechanism.
منابع مشابه
Microstructure Evolution During Al, Ti, and Mo Surface Deposition and Volume Diffusion in Ni-20Cr Wires and Woven Structures
Ni-20 wt pct Cr wires, as individual wires or within 3D woven structures, are alloyed with Mo, Al, and Ti by gas-phase surface deposition and volume interdiffusion. Mo deposition creates Mo-rich coating and Kirkendall pores. Al+Ti co-deposition creates uniform triple-layered coating. The resulting homogenized and aged Ni-(17.4-19.6)Cr-(1.6-1.8)Al-(2.5-3.6)Ti-(1.54.5)Mo(wt pct) wires exhibit c+ ...
متن کاملSelf-branching in GaN Nanowires Induced by a Novel Vapor-Liquid-Solid Mechanism
Nanowires have great potential as building blocks for nanoscale electrical and optoelectronic devices. The difficulty in achieving functional and hierarchical nanowire structures poses an obstacle to realization of practical applications. While post-growth techniques such as fluidic alignment might be one solution, selfassembled structures during growth such as branches are promising for functi...
متن کاملCompositional Modeling of Wax Formation in Petroleum Mixtures
Heavy organics deposition is a common problem in oil industry, especially in oil production, transportation and processing. Wax or solid paraffin series are examples of heavy organics that deposit. Precipitation and crystallization of wax causes major difficulties in different processes. Based on multi-solid theory, a basic model is modified in this paper for wax precipitation in different oils...
متن کاملNanoscale Cellular Structures at Phase Boundaries of Ni-Cr-Al-Ti and Ni-Cr-Mo-Al-Ti Superalloys
The microstructural evolution of Ni-20 pct Cr wires was studied during pack cementation where Al and Ti, with and without prior cementation with Mo, are deposited to the surface of the NiCr wires and subsequently homogenized in their volumes. Mo deposition promotes the formation of Kirkendall pores and subsequent co-deposition of Al and Ti creates a triple-layered diffusional coating on the wir...
متن کاملTi-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels
In this study, physical vapor deposition (PVD) Ti-Cr-N coatings were deposited at two different temperatures 100 and 400ºC on hardened and tempered tool steel substrates. The influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and Young’s modulus were evaluated. Phase compositions were st...
متن کامل