STiMuL : Steady Temperature in Multilayers
نویسنده
چکیده
The usual way to model heat conduction is to solve a partial differential equation (PDE) with boundary conditions (BCs), i.e., a boundary value problem (BVP). For the case of steady-state heat conduction in a homogeneous isotropic solid with thermal conductivity independent of temperature and with no heat source inside the solid, temperature T (x, y, z) in the solid verifies Laplace equation [5] :
منابع مشابه
Magnetic Properties and Structural Study of Ni-Co/Cu Multilayers Prepared by Electrodeposition Method
Ni-Co/Cu multilayers have been grown by electrodeposition method from a single electrolyte (based on Ni(SO4).6H2O, Co(SO4).7H2O, Cu(SO4) and H3BO3) using galvanostatic control on titanium sublayers. The X-ray diffraction (XRD) patterns confirmed the multilayered structure with the nanometer thicknesses. Also, electron diffraction x-ray (EDX) analysis confirmed the purity of deposited samples. ...
متن کاملEffects of Using Multilayers of High Resistance AFRP on Loading Capacity of Reinforced Concrete Beams in Comparison with Low Resistance AFRP Considering EBROG Method
Externally Bonded Reinforcement on Grooves (EBROG) is a new method that has been introduced to postpone or eliminate debonding of FRP sheets from concrete surface in concrete beams strengthened for flexure and increase loading capacity. For strengthening reinforced conceret beams in strructure, use of different types of FRP like: laminate, AFRP, CFRP, and GFRP. By there is some differences bet...
متن کاملEnhancing ethical practice and critical reflection by the sTimul experience in a care ethics lab: Evaluation of the sTimul-experience
Introduction: A three-year European project focused on ethical practice in health and social care. Its key objective was to enhance dignity in care through transformational learning as a result of the sTimul-experience. In the sTimul-experience, health and social care professionals adopted a patients’ role for 24 hours, while nursing students provided them care. Aim: The aim of this evaluation ...
متن کاملNovel (Pt/Co/Pt/Ni) multilayers for magneto-optical recording media
The sputter deposited ~Pt/Co/Pt/Ni! multilayer films were studied as possible alternative low Curie temperature multilayers for magneto-optical recording. The Curie temperatures of these multilayers were found to be between 150 and 300 °C, which are much lower than those of Co/Pt multilayers or ~Co,Ni!/Pt multilayers. The coercivities of these multilayers were between 450 and 800 Oe. The Kerr s...
متن کاملUltra-thin Co/Pd multilayers with enhanced high-temperature annealing stability
Understanding the thermal budget of perpendicular materials is crucial for the potential application perpendicular magnetic tunnel junctions. In this paper, we study the effects of high-temperature rapid thermal annealing on the structural and magnetic properties of ultra-thin Co/Pd multilayers deposited at room temperature. It is shown that perpendicular magnetic anisotropy of ultra-thin Co/Pd...
متن کامل