The Beam Propagation Method Used for the Design of an Integrated Optical Coupler
نویسندگان
چکیده
The beam propagation method (BPM) used for the design of an integrated optical (IO) coupler was proposed in this paper. A modal of the IO coupler was set up in BeamPROP software that is based on the BPM, and then the modes and the bi-directional propagation in the proposed coupler were investigated. Finally, the structure and dimension of the coupler was determined.
منابع مشابه
A novel design for all-optical NAND/NOR/XOR gates based on nonlinear directional coupler
In this paper a novel all-optical logic NAND, NOR and XOR gate based on nonlinear directional coupler theory is demonstrated. We use the identical structure which contains three waveguides, for designing these gates; the only difference however, is the power of inputs light beam. In other words, while a beam with 4 W/μm in power considered as logical one, the output is NAND gate and if a beam w...
متن کاملA novel design for all-optical NAND/NOR/XOR gates based on nonlinear directional coupler
In this paper a novel all-optical logic NAND, NOR and XOR gate based on nonlinear directional coupler theory is demonstrated. We use the identical structure which contains three waveguides, for designing these gates; the only difference however, is the power of inputs light beam. In other words, while a beam with 4 W/μm in power considered as logical one, the output is NAND gate and if a beam w...
متن کاملبهینه سازی و افزایش پهنای باند پیوننده خط شاخه ای موجبری مجتمع شده در زیرلایه به روش حداقل مربعات
Directional couplers are passive devices which are used as power dividers and combiners in microwave, millimeter and terahertz systems. By the use of substrate integrated waveguides (SIW) for the design of such devices, the advantages of waveguide and printed circuit (PC) technologies are utilized simultaneously, such as low cost, small size, low transmission and radiation losses. In this paper...
متن کاملOptical Amplification and Photosensitivity in Sol-Gel Based Waveguides
The sol-gel process has emerged as an effective route for the fabrication of optical waveguides and guided wave devices and circuits. In particular, it is possible to incorporate active dopants like neodymium, erbium, and cesium for integrated optical active devices and circuits. In this paper, a review of recent research on active devices and circuits based on sol-gel process is made. Specific...
متن کاملABCD matrix for reflection and refraction of laser beam at tilted concave and convex elliptic paraboloid interfaces and studying laser beam reflection from a tilted concave parabola of revolution
Studying Gaussian beam is a method to investigate laser beam propagation and ABCD matrix is a fast and simple method to simulate Gaussian beam propagation in different mediums. Of the ABCD matrices studied so far, reflection and refraction matrices at various surfaces have attracted a lot of researches. However in previous work the incident beam and the principle axis of surface are in parallel...
متن کامل