Static Friction in Elastic Adhesive MEMS Contacts, Models and Experiment
نویسندگان
چکیده
Static friction in shearing mode can be expressed as the product of the shear strength of the interface and the real contact area. The influence of roughness on friction in elastic adhesive contact is analyzed. Special attention is paid to low loading conditions, in which the number of contact points is small. The models are used to analyze a friction experiment in a MEMS friction meter.
منابع مشابه
Nano-Scale Effect in Adhesive Friction of Sliding Rough Surfaces
Study of contact and friction at multiple length scales is necessary for the effective design and analysis of surfaces in sliding microand nano-electromechanical systems (MEMS/NEMS). As loading forces decrease in such applications, the size of the asperity contacts tends to decrease into the nano scale regime. Also with the increase in surface area to volume ratio in such systems, the surface f...
متن کاملOn the Transition from Static to Dynamic Boundary Friction of Lubricated PEEK for a Spreading Adhesive Contact by Macroscopic Oscillatory Tribometry
The tribology of lubricated poly(ether ether ketone) (PEEK)—steel tribosystems was investigated in the static and boundary friction regime. Pentaerythrite ester and trimellitic acid ester were used as lubricants. The lubricants differed in their molecular structure but showed only minor differences in their rheological and cohesive energetic properties. In order to investigate the effect of the...
متن کاملFriction Laws for Elastic Nano-Scale Contacts
– The effect of surface curvature on the law relating frictional forces F with normal load L is investigated by molecular dynamics simulations as a function of surface symmetry, adhesion, and contamination. Curved, non-adhering, dry, commensurate surfaces show a linear dependency, F ∝ L, similar to dry flat commensurate or amorphous surfaces and macroscopic surfaces. In contrast, curved, non-ad...
متن کاملStatistical Mechanics of Static and Low-velocity Kinetic Friction
I. Preliminary Remarks A. Introduction B. Some Fundamental Definitions and Questions C. Basic Scenarios for Friction D. Phenomenology of Static and Low-Velocity Kinetic Friction II. Rigid Walls A. Geometric Interlocking B. Thermal Effects C. Applications 1. Nanotubes 2. Curved, Nanoscale Contacts III. Dry, Elastic Friction A. Properties of the Prandtl–Tomlinson Model 1. Definition of the Model ...
متن کاملMechanics of Particle Adhesion
The fundamentals of particle-particle adhesion for ultrafine particles (d < 10 μm) are presented using continuum mechanics approaches. The models for elastic (Hertz, Huber), elastic-adhesive (Derjaguin, Johnson, Maugis, Greenwood), viscoelastic (Yang), plastic-adhesive (Krupp, Molerus, Johnson, Maugis & Pollock) contact displacement response of a single, normal loaded, isotropic, smooth contact...
متن کامل