Natural Convection in a Square Cavity in the Presence of Heated Plate
نویسندگان
چکیده
Abstract. Natural convection heat transfer in a square cavity induced by heated plate is studied numerically. Top and bottom of the cavity are adiabatic, the two vertical walls of the cavity have constant temperature lower than the plate’s temperature. The flow is assumed to be two-dimensional. The discretized equations were solved by finite difference method using Alternating Direction Implicit technique and Successive OverRelaxation method. The study was performed for different values of Grashof number ranging from 10 to 10 for different aspect ratios and position of heated plate. Air was chosen as a working fluid (Pr = 0.71). The effect of the position and aspect ratio of heated plate on heat transfer and flow were addressed. With increase of Gr heat transfer rate increased in both vertical and horizontal position of the plate. When aspect ratio of heated thin plate is decreased the heat transfer also decreases. For the vertical situation of thin plate heat transfer becomes more enhanced than for horizontal situation.
منابع مشابه
Numerical Study of Hydro-Magnetic Nanofluid Mixed Convection in a Square Lid-Driven Cavity Heated From Top and Cooled From Bottom
In the present research mixed convection flow through a copper-water nanofluid in a driven cavity in the presence of magnetic field is investigated numerically. The cavity is heated from top and cooled from bottom while its two vertical walls are insulated. The governing equations including continuity, N-S and energy equations are solved over a staggered grid system. The study is conducted for ...
متن کاملNumerical Simulation of Mixed Convection Flows in a Square Double Lid-Driven Cavity Partially Heated Using Nanofluid
A numerical study has been done through an Al2O3–water in a double lid-driven square cavity with various inclination angles and discrete heat sources. The top and right moving walls are at low temperature. Half of the left and bottom walls are insulated and the temperatures of the other half are kept at high. A large number of simulations for a wide range of Richardson number ...
متن کاملLattice Boltzmann method for MHD natural convection of CuO/water nanofluid in a wavy-walled cavity with sinusoidal temperature distribution
In this paper, natural convection heat transfer of CuO-water Nanofluid within a wavy-walled cavity and subjected to a uniform magnetic field is examined by adopting the lattice Boltzmann model. The left wavy wall is heated sinusoidal, while the right flat wall is maintained at the constant temperature of Tc. The top and the bottom horizontal walls are smooth and insulated against heat and mass....
متن کاملNumerical Study of Electro-thermo-convection in a Differentially Heated Cavity Filled with a Dielectric Liquid Subjected to Partial Unipolar Injection
The Coulomb force applied by an electric field on any charge present in a dielectric liquid may cause fluid motion. At high applied electric fields in an insulating liquid, electric charge carriers are created at metallic/liquid interfaces, a process referred to as ion injection, and result from electrochemical reactions. In this article we deals with the problem of electro thermal convection i...
متن کاملBuoyancy driven heat transfer of a nanofluid in a differentially heated square cavity under effect of an adiabatic square baffle
Buoyancy driven heat transfer of Cu-water nanofluid in a differentially heated square cavity with an inner adiabatic square baffle at different positions is studied numerically. The left and right walls of the cavity are at temperatures of Th and Tc, respectively that Th > Tc, while the horizontal walls are insulated. The governing equations are discretized using the finite volume method while ...
متن کامل