Analytical Prediction of Stability Limit in Turning Operations
نویسندگان
چکیده
Unstable cutting due to chatter vibrations is one of the most important problems during metal cutting operations. Chatter can be a limitation for productivity and surface quality in turning operations, especially when long and slender tools and parts are involved. In this study, an analytical stability method for turning process is presented. The model takes the cutting geometry into consideration, and proposes a new solution procedure for the dynamic chip thickness at the insert nose. The analytically calculated absolute stable depth of cuts are compared with the chatter test results, and a good agreement is observed.
منابع مشابه
Analytical Modeling of Chatter Stability in Turning and Boring Operations: A Multi-Dimensional Approach
In this study, an analytical model for the stability of turning and boring processes is proposed. The proposed model is a step ahead from the previous studies as it includes the dynamics of the system in a multidimensional form, uses the true process geometry and models the insert nose radius in a precise manner. Simulations are conducted in order to compare the results with the traditional ori...
متن کاملMulti-dimensional Modelling of Chatter Stability in Parallel Turning Operation
Recently, use of parallel turning operations has been increasing due to the potential they offer for improved material removal rate using multiple cutting tools. However, chatter vibrations resulting from process instability may limit the productivity in these operations. In order to determine favourable conditions for increased stability, dynamics of parallel turning operations must be modelle...
متن کاملA New Analytical Approach to Reconstruct Residual Stresses Due to Turning Process
A thin layer on the component surface can be found with high tensile residual stresses, due to turning operations, which can dangerously affect the fatigue performance of the component. In this paper an analytical approach is presented to reconstruct the residual stress field from a limited incomplete set of measurements. Airy stress function is used as the primary unknown to directly solve the...
متن کاملA Comparative Study on the Formability Prediction of Two-Layer Metallic Sheets
Two-layer metallic sheets have wide applications in aerospace, marine, automotive and domestic industries due to their superlative characteristics. In this paper, the formability of two-layer sheet is investigated through analytical, experimental and numerical approaches. An analytical model is developed based on Marciniak-Kuczynski method associated Hill’s non-quadratic yield criterion. Formin...
متن کاملInvestigation of Bishop’s and Janbu’s Models Capabilities on Slope Stability Problems with Special Consideration to Open-Pit Mining Operations
One of the most effective parameters in economics of open-pit mines is the pit slope angle, so that the slope angle more than the optimum value increases the probability of a large failure in the pit wall and the slope angle less than the optimum value leads to increasing stripping ratio and reducing net present value of mine. Therefore, in this paper, considering the limit equilibrium methods ...
متن کامل