A laser-based method for measuring thermal nociception of cattle.
نویسندگان
چکیده
We describe a method for measuring nociception in cattle using a CO(2) laser aimed at the caudal aspect of the metatarsi. In Experiment 1, infrared thermography showed that calves responded by lifting their legs when skin temperatures reached 45-55 degrees C. In Experiment 2a, the validity of the method was tested by comparing the response latencies of 14 calves to two power settings (2.25 W vs. 4.5 W) with each setting being applied six times. We found that both leg-lift latencies and tail-flick latencies were lower at the higher power setting, and the calves were more likely to respond by kicking than by simply moving the leg. The standard deviations between and within calves were smaller at the higher power setting, and the large within-calf variation means that at least three tests were required to obtain reliable measures that could differentiate between calves. In Experiment 2b, application of the laser at a range of power settings (2.0, 3.0, 4.0, 4.5, 5.0 and 5.5 W) on 16 calves showed that response latencies decreased as power increased up to 4.5 W, after which no further change occurred. In Experiment 3, the repeatability of the method was evaluated on nine measures with the high power setting (4.5 W). The coefficient of variation associated with repetition of the measures was 36%. In general, we found little change in response latencies with repeated use of the laser, except that responses on the second test tended to be shorter. Experiment 4 showed that ambient temperatures between 16 degrees C and 27 degrees C did not affect response latencies, but these were longer at temperatures of 7 degrees C. We suggest that the method is a useful way of measuring cattle's sensitivity to nociception as the animals need not be restrained and the distance to the animal need not be closely controlled. However, to obtain accurate, valid and reliable measures it is necessary to use a high power setting (4.5 W) and take at least three consecutive measures of the response latency.
منابع مشابه
Measuring the deposited energy from a non-ionizing laser beam in water by digital holographic interferometry
Digital Holographic interferometry is a powerful and widely used optical technique for accurate measurement of variations in physical quantities such as density, refractive index, and etc. In this study, an experimental digital holographic interferometry setup was designed and used to measure the amount of energy changes induced by absorption of radiation from a non-ionizing infrared laser beam...
متن کاملNociceptor-Enriched Genes Required for Normal Thermal Nociception.
Here, we describe a targeted reverse genetic screen for thermal nociception genes in Drosophila larvae. Using laser capture microdissection and microarray analyses of nociceptive and non-nociceptive neurons, we identified 275 nociceptor-enriched genes. We then tested the function of the enriched genes with nociceptor-specific RNAi and thermal nociception assays. Tissue-specific RNAi targeted ag...
متن کاملInfluence of Interface Thermal Resistance on Relaxation Dynamics of Metal-Dielectric Nanocomposite Materials under Ultrafast Pulse Laser Excitation
Nanocomposite materials, including noble metal nanoparticles embedded in a dielectric host medium, are interesting because of their optical properties linked to surface plasmon resonance phenomena. For studding of nonlinear optical properties and/or energy transfer process, these materials may be excited by ultrashort pulse laser with a temporal width varying from some femtoseconds to some hund...
متن کاملNumerical study of thermal dynamics of gold nanoparticles in laser-induced hyperthermia therapy
Damage of the normal tissue is a serious concenrn in cancer treatment. Hyperthermia by laserhas been considered as a safe cancer treatments methods with lower harmful effects on normaltissues. Using nanoparticles in cancer treatment has improved laser therapy, which is based ona selective cell targeting method to localize cell damages. Metallic nanoparticles such as gold,silver, and copper have...
متن کاملNumerical and Experimental Study of Effect of Scan Velocity in Laser Forming by Temperature Gradient Mechanism
In this paper the process of laser forming has been investigated using an analytical and an experimental method for three levels scans velocity. A coupled analysis has been performed in ANSYS®. Also in order to prove the predictive methods, experiments on thin sheet metals have been done when a laser of a fair power was used. Before done, experiments were designed with full factorial chosen as ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied animal behaviour science
دوره 66 4 شماره
صفحات -
تاریخ انتشار 2000