Synthesis and characterization of low dimensional ZnS- and PbS-semiconductor particles on a montmorillonite templatew
نویسندگان
چکیده
Low dimensional metal sulfide particles have been prepared in the interlayers of montmorillonites via reactions of the metal ion-exchanged clay minerals in aqueous dispersions with gaseous hydrogen sulfide. The montmorillonites separated from the Wyoming (USA) and Jelšový Potok (Slovakia) bentonites were saturated with Pb or Zn. In the final nanohybrids, the smectite mineral can be incorporated with metal sulfide pillars and/or nanoparticles. Properties of the prepared materials were investigated by various analytical techniques. The formation of metal sulfide nanoparticles in the interlayer galleries was indicated by X-ray diffraction and energy dispersive X-ray analysis. About 50% of Pb or Zn present in montmorillonite has formed metal sulfide semiconducting units. Infrared spectroscopy and thermogravimetric analysis were used for characterization of starting materials and products. Ultraviolet-visible absorption and photoluminescence spectroscopies confirmed that final composite systems acquired the optical properties of the incorporated quantum low dimensional systems exhibiting blue shift of the energy gap and higher oscillator strength excitonic peaks. Larger amounts of metal sulfide nanoparticles were formed in montmorillonite Jelšový Potok probably as a consequence of its higher cation exchange capacity.
منابع مشابه
Restricted charge recombination process in PbS quantum dot sensitized solar cells by different coating cycles of ZnS films
The relatively low power conversion efficiency (PCE) of quantum dot sensitized solar cells (QDSSCs) is attributed to charge recombination at the interfaces. Charge recombination process could be suppressed by coating the QD layer with a wide band gap semiconductor such as ZnS, which acts as a blocking layer between the QDs and hole transport material (HTM). In present study, to improve PCE of P...
متن کاملStructural, morphological and optical characterization of green synthesized ZnS nanoparticles using Azadirachta Indica (Neem) leaf extract
ZnS nanoparticles have been synthesized using various amounts of aqueous Azadirachta Indica (Neem) leaf extract as capping agent and stabilizer. The synthesized nanoparticles were studied by FTIR, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive analysis of X-rays (EDAX) and UV-Visible spectroscopy. FTIR spect...
متن کاملA rapid microwave route for the synthesis of ZnS nanoparticles
ZnS nanoparticles were synthesized via a simple surfactant free microwave route. In this synthesis, thioacetamide was used as sulfur source. The effects of different parameters such as type of zinc precursor, time and power of irradiation on the morphology and particle size of the products have been investigated. The nanostructures were characterized by ...
متن کاملCAVITATION DEPOSITION OF ZnS NANOPARTICLES INTO COMPOSITE WITH MONTMORILLONITE PARTICLES
In this paper we report on ZnS nanoparticles produced by precipitation of zinc acetate and sodium sulphide and stabilized by cetyltrimethylammonium bromide (CTAB) in aqueous media and deposited on montmorillonite (MMT). For the deposition a new method based on intensive cavitation was used. The montmorillonite carrier was first disintegrated by intense turbulent mixing in an ultrasonic field in...
متن کاملSynthsis of Ag2O2 Semiconductor Micropowder by Plasma Electrolysis Methode and its Optical Characterization
Plasma electrolysis is a novel method for synthesis and processing of materials and nanomaterials, which uses plasma-solution interaction. In this paper, a simple setup of pin-to-solution electrical discharge with aqueous solution of silver nitrate in normal air is used. Experimental observations show that by start of electrical discharge and formation of air plasma between metal pin and soluti...
متن کامل