Vector analysis and control of advanced static VAR compensators
نویسندگان
چکیده
The advanced static VAR compensator (now widely known as the static condenser or STATCON) uses a high power self-commutating inverter to draw reactive current from a transmission line. Two fundamentally different types of invertor can be used for this purpose, one providing control of output voltage magnitude and phase angle, and the other having only phase angle control. For each of these types, the governing equations are derived, and frequency domain analysis is used to obtain the relevant transfer functions for control system synthesis. Further analysis is provided to determine the response of the STATCON to negative sequence and harmonic voltage components on the transmission line. The results are illustrated with measured waveforms obtained from a scaled analogue model of an 80 MVAR STATCON.
منابع مشابه
Investigation of Two Vector Control Based Methods for Static Synchronous Series Compensator
In this paper, two vector control systems for investigating the performance of Static Synchronous Series Compensators (SSSC) in steady state conditions are presented that are based on famous d-q axis theory. The workability of proposed method to simplify the SSSC mathematical expressions is shown. The performance of SSSC with two different vector controllers, first based on d-q line current...
متن کاملH&infin Controller Design for Static VAR Compensators in Industrial Networks
This paper deals with the design and evaluation of a robust controller for static VAR compensator (SVC) in remote industrial power systems to enhance the voltage profile for three-phase single cage induction motor (SCIM) loads. The controller design is based on H∞ theory to deal with uncertainties arising in industrial network modelling. 
The performance of the H∞ controller has been evaluat...
متن کاملH&infin Controller Design for Static VAR Compensators in Industrial Networks
This paper deals with the design and evaluation of a robust controller for static VAR compensator (SVC) in remote industrial power systems to enhance the voltage profile for three-phase single cage induction motor (SCIM) loads. The controller design is based on H∞ theory to deal with uncertainties arising in industrial network modelling. The performance of the H∞ controller has been evaluated...
متن کاملControl Stability Evaluation of Multiple Distribution Static Compensators based on Optimal Coefficients using Salp Swarm Algorithm
In order to solve the problem of voltage drop and voltage imbalance in the distribution systems, the injection of reactive power by multiple static compensators is used. The distributed generation such as photovoltaic systems could play a role of the static compensators by producing reactive power. In this paper, the integral to droop line algorithm is used to control the reactive power in busb...
متن کاملTransient Minimization Within Static Var Compensated Distribution Systems
VAR support should be supplied as close to the load as possible to minimize transmission losses. For voltage control and for improvement of total power factor in a distribution system the circuit- breaker switched capacitor banks can be used. The problems with this solution are the voltage steps caused by the large sizes of the capacitor banks as well as the transients caused on insertion. Thyr...
متن کامل