Assessment of exposure to PCDD/F, PCB, and PAH at a basic oxygen Steelmaking (BOS) and an iron ore sintering plant in the UK.

نویسندگان

  • Kevin Jackson
  • Eric Aries
  • Raymond Fisher
  • David R Anderson
  • Adrian Parris
چکیده

An assessment was carried out at a UK integrated steelworks to investigate the exposure of workers via inhalation to dioxins [polychlorinated dibenzo-p-dioxins (PCDD/F)], polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAH) including benzo[a]pyrene (B[a]P). Investigations focused on a basic oxygen steelmaking (BOS) plant and an iron ore sintering plant. The highest concentrations of PCDD/F and dioxin-like PCB were found at the BOS vessels and sinter strand area at the BOS and sinter plant, respectively. A risk assessment was carried out by comparing the daily intake of PCDD/F and PCB via inhalation with the recommended tolerable daily intake (TDI) proposed by the World Health Organisation (WHO). For the most exposed category of worker in this study (i.e. sinter plant workers inside the strand area), the estimated daily intake via inhalation was estimated to be 0.25 pg WHO-toxic equivalent concentrations (TEQ) kg(-1) body weight (bw). Considering that the average UK adult exposure to PCDD/F from the diet is 1.8 pg WHO-TEQ kg(-1) bw day(-1), the results indicated that the estimated daily intake of PCDD/F and PCB via inhalation for sinter plant workers would not result in the recommended range of the TDI (1-4 pg WHO-TEQ kg(-1) bw day(-1)) being exceeded. Cancer risks for a 40-year occupational exposure period were determined by multiplying the estimated intake by the inhalation cancer potency factor for 2,3,7,8-tetrachlorodibenzo-p-dioxin. For the most exposed category of worker, cancer risks from exposure to PCDD/F and PCB ranged from 2.5 × 10(-6) to 5.2 × 10(-5). Under most regulatory programmes, excess cancer risks between 1.0 × 10(-6) and 1.0 × 10(-4) indicate an acceptable range of cancer risk, suggesting a limited risk from PCDD/F and PCB exposure for workers in the sinter plant. With regard to PAH, B[a]P concentrations were typically <10 ng m(-3) at all locations at both the sinter plant and the BOS plant. In several cases, particularly at the sinter plant, B[a]P concentrations were well below or only marginally above the target value of 1 ng m(-3) specified in ambient air by the European Commission in the fourth 'Daughter' Directive of the Air Quality Framework Directive suggesting a very low risk of exposure for workers. For PAH, excess cancer risks ranged from 2.4 × 10(-6) to 7.3 × 10(-6) for BOS plant workers and from for 5.3 × 10(-7) to 1.5 × 10(-5) for sinter plant workers, well within the acceptable range proposed by the US EPA.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Life cycle assessment of steel production from iron scrap: a case study at a steel plant

Background and Objective: The steel industry is the world's largest consumer of energy. A large amount of iron waste is produced annually, which its use in the steel industry can be economic. The purpose of this study was to investigate the environmental impacts of the steelmaking from iron scrap as a raw material using a life cycle assessment (LCA) method. Materials and Methods: Simapro softw...

متن کامل

Identification the Content of the Windbox Dust Related to the Formation of PCDD/Fs during the Iron Ore Sintering Process

This study measured the contents of the ionic and elemental constituents, and the chemical compounds containing in windbox (WB) dusts collected from a commercial iron ore sintering plant, then the results were used to identify possible PCDD/Fs formation pathways in the WB. We found that the abundance in both KCl and NaCl may provide a suitable condition for de novo synthesis of PCDD/Fs in the W...

متن کامل

Low-temperature formation and degradation of chlorinated benzenes, PCDD and PCDF in dust from steel production.

Dust from thermal processes may catalytically enhance the formation of chlorinated aromatic compounds under oxygen-rich conditions. The activities of two dust samples from electric arc furnaces and one from iron ore-based steelmaking (oxygen converter) were investigated in a laboratory experiment. The dust samples were heated at 300 degrees C for 2 h in an air atmosphere. The concentrations of ...

متن کامل

Modeling and Simulation of Processes from an Iron Ore Sintering Plant

This work presents the mathematic models of the basic processes from an iron ore processing plant. Based on the mathematic models, using the Matlab/Simulink platform, it was achieved the simulation of the dosing process and simulation of the sintering process. The achieved mathematic model allows the determination of the material flows in the charge at their chemical composition variation, or a...

متن کامل

Mathematical Modeling and Simulation in Matlab/Simulink of Processes from Iron Ore Sintering Plants

This work presents the mathematic models of the basic processes from an iron ore processing plant. Based on the mathematic models, using the Matlab/Simulink platform, it was achieved the simulation of the dosing process and simulation of the sintering process. The achieved mathematic model allows the determination of the material flows in the charge at their chemical composition variation, or a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • The Annals of occupational hygiene

دوره 56 1  شماره 

صفحات  -

تاریخ انتشار 2012