Logo-Antenna Based RFID Tags for Advertising Application
نویسندگان
چکیده
─ In this paper we provide the basis of using radio frequency identification (RFID) tags for advertisement. Two RFID tags that apply to the 866 MHz and 915 MHz operating frequencies, respectively, were designed based on the logos of two universities participating in this project. Several fabrication methods were used to build the RFID tags on different substrates. The experimental results exhibited favorable read ranges and radiation patterns. This work demonstrates the applicapability and design flexibility of RFID tags for many advertising
منابع مشابه
Antenna-Based Passive UHF RFID Sensor Tags - Design and Application
RFID, as a low cost technology with a long life time, provides great potential for transmitting sensor data in combination with the ordinary ID number. The sensor can, for example, be integrated either in the chip or in the antenna of an RFID tag. This thesis focuses on the design of antenna-based UHF RFID sensor tags as wireless sensors at the lowest possible cost level compatible with standar...
متن کاملAdhesive Tag Fixation: A guide how to bond RFID Tags
Proximity to Metal Metal presents a particular challenge to RFID. Most RFID tags show reduced performance when used near metal. Generic tags placed directly on a metal surface will likely not read at all. However, advanced RFID tags are specifically designed for use on or near metal. These tags typically have a special housing incorporating a gap of controlled width between the tag’s antenna an...
متن کاملRFID Sensor Modeling by Using an Autonomous Mobile Robot
Radio Frequency Identification (RFID) technology has been available for more than fifty years. Nevertheless, only in the last decade, the ability of manufacturing the RFID devices and standardization in industries have given rise to a wide application of RFID technology in many areas, such as inventory management, security and access control, product labelling and tracking, supply chain managem...
متن کاملPerformance Analysis of RFID Tag Detection with Smart Antenna Using Adaptive Power Allocation
This paper proposes a novel approach to optimize the tag detection, coverage problem and power allocation issues of the RFID reader and tags. We have investigated the effects of variable localization of RFID tags from reader and power loss, inefficiency and distance constraints caused due to equal power allocations to the tags. As an improvement to the situation, implementation of adaptive algo...
متن کاملInteroperation of an UHF RFID Reader and a TCP/IP Device via Wired and Wireless Links
A main application in radio frequency identification (RFID) sensor networks is the function that processes real-time tag information after gathering the required data from multiple RFID tags. The component technologies that contain an RFID reader, called the interrogator, which has a tag chip, processors, coupling antenna, and a power management system have advanced significantly over the last ...
متن کامل