Cubic Spline Trajectory Generation with Axis Jerk and Tracking Error Constraints
نویسندگان
چکیده
This paper presents a cubic spline trajectory generation algorithm that produces continuous position, velocity, and acceleration profiles for 3-axis CNC machines with confined axis jerk and tracking error. A series of reference knots are connected using cubic spline functions in time t for constructing axis trajectories. They are generated in such a way that continuity up to the second derivative is preserved along the overall composite curve. For CNC machines governed by a typical PID controller, the tracking error is also constrained as well as the velocity, acceleration, and jerk for each axis. The time intervals between each pair of adjacent knots are scheduled such that the machining time is minimized subject to all the constraints. Simulation results are presented to illustrate the application of the algorithm.
منابع مشابه
Electronic cam motion generation with special reference to constrained velocity, acceleration, and jerk.
Electronic cam motion involves velocity tracking control of the master motor and trajectory generation of the slave motor. Special concerns such as the limits of the velocity, acceleration, and jerk are beyond the considerations in the conventional electronic cam motion control. This study proposes the curve-fitting of a Lagrange polynomial to the cam profile, based on trajectory optimization b...
متن کاملFeed optimization for five-axis CNC machine tools with drive constraints
Real time control of five-axis machine tools requires smooth generation of feed, acceleration and jerk in CNC systems without violating the physical limits of the drives. This paper presents a feed scheduling algorithm for CNC systems to minimize the machining time for five-axis contour machining of sculptured surfaces. The variation of the feed along the five-axis tool-path is expressed in a c...
متن کاملSuccessive dynamic programming and subsequent spline optimization for smooth time optimal robot path tracking
The time optimal path tracking for industrial robots regards the problem of generating trajectories that follow predefined end-effector (EE) paths in shortest time possible taking into account kinematic and dynamic constraints. The complicated tasks used in industrial applications lead to very long EE paths. At the same time smooth trajectories are mandatory in order to increase the service lif...
متن کاملSmooth Trajectory Planning Algorithms for Industrial Robots: an Experimental Evaluation
An analysis of the experimental results of a new method for smooth trajectory planning for robot manipulators is presented in this paper. The technique is based on the minimization of an objective function that is composed of two terms: the first one is proportional to the trajectory execution time, the second one is proportional to the integral of the squared jerk. The need for a smooth trajec...
متن کاملTrajectory Planning, Optimization and Control of a Hybrid Mechanical Press
Hybrid mechanical press is an innovative sheet metal stamping press that has the advantages of both mechanical press and the hydraulic press. This paper focuses on the control of the hybrid mechanical press, including trajectory planning, trajectory optimization and real time feedback control. The trajectory planning is based on inverse kinematics and cubic spline interpolation. The trajectory ...
متن کامل