Fabrication of Field Effect Transistors CNF
نویسنده
چکیده
We have fabricated field effect transistors in order to study charge trapping in pentacene transistors and charge noise in a variety of organic field effect transistors.
منابع مشابه
Wafer-scale fabrication of a vertically-aligned NEMS switch based on carbon nanofibers
Fabrication of nanoscaled transistors based on carbon nanotubes and inorganic nanowires is typically demonstrated with a “pick-and-place” or similar method which allows for fabrication of small numbers of transistors at a time. While these, and other, devices have been used to demonstrate potential applications of carbon nanotubes, these methods are not applicable to wafer scale production with...
متن کاملModeling of Manufacturing of Field-Effect Heterotransistors without P-n-junctions to Optimize Decreasing their Dimensions
It has been recently shown that manufacturing p-n-junctions, field-effect and bipolar transistors, thyristors in a multilayer structure by diffusion or ion implantation with the optimization of dopant and/or radiation defects leads to increase the sharpness of p-n-junctions (both single p-n-junctions and p-n-junctions framework their system). Due to the optimization, one can also obtain increas...
متن کاملField effect transistor nanobiosensors: State-of-the-art and key challenges as point of care testing devices
The existing health care systems focus on treating diseases rather than preventing them. Patients are generally not tested unless physiological symptoms are appeared. When they do get tested, the results often take several days and can be inconclusive if the disease is at an early stage. In order to facilitate the diagnostics process and make tests more readily available for patients, the conce...
متن کاملBallistic (n,0) Carbon Nanotube Field Effect Transistors' I-V Characteristics: A Comparison of n=3a+1 and n=3a+2
Due to emergence of serious obstacles by scaling of the transistors dimensions, it has been obviously proved that silicon technology should be replaced by a new one having a high ability to overcome the barriers of scaling to nanometer regime. Among various candidates, carbon nanotube (CNT) field effect transistors are introduced as the most promising devices for substituting the silicon-based ...
متن کاملFabrication and electrical properties of MoS2 nanodisc-based back-gated field effect transistors
Two-dimensional (2D) molybdenum disulfide (MoS2) is an attractive alternative semiconductor material for next-generation low-power nanoelectronic applications, due to its special structure and large bandgap. Here, we report the fabrication of large-area MoS2 nanodiscs and their incorporation into back-gated field effect transistors (FETs) whose electrical properties we characterize. The MoS2 na...
متن کامل