Electroluminescent Devices Using a Polymer of Regulated Conjugation Length and a Polymer Blend
نویسندگان
چکیده
منابع مشابه
Compatibilization of polycarbonate/poly (ethylene terephthalate) blends by addition of their transesterification product
In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specified mixing times representative a specific structure of copolymers and each one employed to physically compatibilize a PC/PET blend with a fixed composition. Reactive blending and copoly...
متن کاملPolyfluorene-Polytriarylamine Block Copolymer as an Additive for Electroluminescent Devices Based on Polymer Blends
Electroluminescent characteristics were investigated for the blue emitting devices fabricated with the blend systems consisting of hole transporting polytriarylamine (PTAA), electron transporting polyfluorene (PF), and a block copolymer with both segments (PF-b-PTAA) as an active layer in order to elucidate the relationship between the chemical nature and morphology of the active layer, and EL ...
متن کاملPES/Quaternized-PES Blend Anion Exchange Membranes: Investigation of Polymer Compatibility and Properties of the Blend
Polyethersulfone (PES)-based anion exchange blend membranes were prepared from quaternized-PES (Q-PES) and N-Methyl-2-pyrrolidone (NMP) casting solutions with water as coagulant via non-solvent induced phase inversion. The compatibility of the blend system was investigated through thermodynamic studies while membrane formation was determined using the cloud point techni...
متن کاملElectroluminescent devices based on cross-linked polymer blends
We report the electrical and optical properties of two-component blends of electron and hole transporting materials in single and bilayer structures for organic light emitting diode ~OLED! applications. The materials considered were a blue-emitting bipolar transporting polyfluorene, poly~9,9-di-n-hexylfluorene! ~DHF!, and a hole-transporting material, poly-@4-nhexyltriphenylamine# ~HTPA!. We co...
متن کاملCharacterizing films of polyethylene blends: An application of colorimetric parameters measurements
This study reports an application of instrumental color measurement for quantifying and comparing the optical properties of high density polyethylene HDPE and low density polyethylene LDPE blend films and the effect of blending ratio and miscibility on these properties. The technique of spectrophotometry in transmission and reflectance modes can be used as a versatile tool to evaluate the color...
متن کامل