Performance Boost in Industrial Multifilamentary Nb3Sn Wires due to Radiation Induced Pinning Centers
نویسندگان
چکیده
We report non-Cu critical current densities of 4. 09 ⋅ 10(9) A/m(2) at 12 T and 2.27 ⋅ 10(9) A/m(2) at 15 T obtained from transport measurements on a Ti-alloyed RRP Nb3Sn wire after irradiation to a fast neutron fluence of 8.9 ⋅ 10(21) m(-2). These values are to our knowledge unprecedented in multifilamentary Nb3Sn, and they correspond to a Jc enhancement of approximately 60% relative to the unirradiated state. Our magnetometry data obtained on short wire samples irradiated to fast neutron fluences of up to 2.5 ⋅ 10(22) m(-2) indicate the possibility of an even better performance, whereas earlier irradiation studies on bronze-processed Nb3Sn wires with a Sn content further from stoichiometry attested a decline of the critical current density at such high fluences. We show that radiation induced point-pinning centers rather than an increase of the upper critical field are responsible for this Jc enhancement, and argue that these results call for further research on pinning landscape engineering.
منابع مشابه
Study of Magnetic Flux Pinning in Nb-Ti Superconductors Using Artificial Pinning Center Technology
Multifilamentary Nb-Ti superconducting wires with heterogenous flux pinning nano-structures have been fabricated using artificial pinning center (APC) technology. Pinning centers were introduced into Nb-Ti filaments, consisting of Cu-Ni, Nb and Nb+Ti rods with the triangular arrangement and the volume fraction of 17 %. After final hot extrusions, the APC wires were drawn down over a high strain...
متن کاملHigh-field transport properties of a P-doped BaFe2As2 film on technical substrate
High temperature (high-Tc) superconductors like cuprates have superior critical current properties in magnetic fields over other superconductors. However, superconducting wires for high-field-magnet applications are still dominated by low-Tc Nb3Sn due probably to cost and processing issues. The recent discovery of a second class of high-Tc materials, Fe-based superconductors, may provide anothe...
متن کاملTHE INFLUENCE OF TRANSVERSE, COMPRESSIVE STRESS ON THE CRITICAL CURRENT OF MULTIFILAMENTARY Nb,Sn AND NbTi WIRES
In order to investigate the critical current of multifilamentary wires as a function of the applied field and transverse, compressive stress, a special experimental arrangement has been developed. In this arrangement, the repulsive Lorentz force generated by a set of magnets is used, to press a sample between two parallel surfaces. From the first experimental results on a multifilamentary NbTi ...
متن کاملA 50 mm BORE, 13 TESLA SUPERCONDUCTING MAGNET EMPLOYING A PREREACTED MULTIFILAMENTARY Nb3Sn CONDUCTOR
Following the construction of two hybrid magnets, we intend to build up a third hybrid magnet which will produce about 30 T. A prereacted multifilamentary Nb Sn conductor will be employed for the 12 T superconducting part of the hybrid. As a first step for the project, we have designed, constructed and tested a magnet which consists of 14 double-pancakes made of a prereacted multifilamentary Nb...
متن کاملNb3Sn Wire Technology for High-field Superconducting Magnet
Nb3Sn superconducting wires are widely used for highfield superconducting magnets, and the NMR magnet is one of the most successful applications. In order to realize a large Jc (critical current density), which is essential to high-field superconducting magnets, several different types of production methods have been developed, such as the bronze-route method, the powderin-tube method and the i...
متن کامل