Green composites of polypropylene and eggshell: Effective biofiller size reduction and dispersion by single-step processing with solid-state shear pulverization

نویسندگان

  • Krishnan A. Iyer
  • John M. Torkelson
چکیده

Eggshell (ES), a waste byproduct from food processing and hatcheries, contains 95% calcium carbonate (CC), making it a potentially attractive, less expensive substitute for commercial CC. Past work used complex grinding–sieving and/or chemical modification steps to aid in dispersing ES in polymers such as polypropylene (PP). Both steps add to the cost and reduce the green aspect of the composite. Here, green composite materials of PP with 5–40 wt% unmodified ES shards of several centimeters in size are directly processed using continuous, single-step solid-state shear pulverization (SSSP). Electron microscopy and particle size analysis show very good dispersion with some ES particles near the nanoscale in the composite. Well-dispersed ES particles dramatically increase PP crystallization rates with a 5–7% increase in PP crystallinity. The very good dispersion leads to a major increase in Young’s modulus (87% increase relative to neat PP for 40 wt% ES) and a modest increase in hardness; composites exhibit reductions in yield strength, elongation at break, and impact properties. Mechanical and crystallization properties are equal to or better than the best literature data for PP/ES composites without chemical modification made by multi-step approaches involving melt processing. In addition, the composites exhibit high thermal degradation temperatures compared to neat PP, indicating the potential for ES to improve processing stability. Composites with 20–40 wt% ES exhibit solid-like rheological response with no crossover of shear storage and loss moduli. Nevertheless, PP/ES composites retain viscosities close to that of neat PP at shear rates experienced in melt processing. Overall, property enhancements resulting from superior dispersion of ES in PP achieved by SSSP reveal ES to be a promising green filler for thermoplastics. 2014 Published by Elsevier Ltd.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Cellulose nanocrystal/polyolefin biocomposites prepared by solid-state shear pulverization: Superior dispersion leading to synergistic property enhancements

Cellulose nanocrystals (CNCs), a class of renewable bionanomaterials with excellent mechanical properties, have gained major interest as filler for polymers. However, challenges associated with effective CNC dispersion have hindered the production of composites with desired property enhancements. Here, composites of polypropylene (PP) and low density polyethylene (LDPE) with 5e10 wt% unmodified...

متن کامل

Dispersion and Property Enhancements in Polyolefin/Soy Flour Biocomposites Prepared via Melt Extrusion Followed by Solid-State Shear Pulverization

Biocomposites of low-density polyethylene (LDPE) and polypropylene (PP) with 5–40wt% soy flour (SF) are produced by two-step single-screw extrusion (SSE) followed by solid-state shear pulverization (SSSP). The SSE-SSSP approach overcomes limitations with melt mixing, e.g poor SF dispersion and degradation, and limitations with single-step SSSP. Microscopy shows that SF is well dispersed in SSE-...

متن کامل

Novel, Synergistic Composites of Polypropylene and Rice Husk Ash: Sustainable Resource Hybrids Prepared by Solid-State Shear Pulverization

Rice husk ash (RHA) is an agrowaste byproduct resulting from the incineration of rice husks for power production; white RHA is 90 wt% or more silica, which makes it a potentially sustainable and inexpensive substitute for commercial (less “green”) silica filler. Past research on polypropylene (PP)-RHA hybrids made by melt processing has yielded modest increments in Young’s modulus, reduced yiel...

متن کامل

Sustainable Green Hybrids of Polyolefins and Lignin Yield Major Improvements in Mechanical Properties When Prepared via Solid-State Shear Pulverization

Lignin, a byproduct of paper and pulp industries, is a sustainable, inexpensive biomaterial with potential as composite filler. Past research on polyolefin/lignin composites made by melt processing has led to modest increases in Young’s modulus and drastic reductions in tensile strength and elongation at break relative to neat polymer. Here, green hybrids of low density polyethylene (LDPE) and ...

متن کامل

Comparison of polyolefin biocomposites prepared with waste cardboard, microcrystalline cellulose, and cellulose nanocrystals via solid-state shear pulverization

As a significant part of municipal solid waste (MSW), waste cardboard (CB) is a sustainable, inexpensive, and rich source of cellulose. Previous studies of polyolefin/CB composites have reported modest enhancement to major reduction in modulus and major reduction in elongation at break values relative to neat polymer. Here, green hybrids of low density polyethylene (LDPE) and polypropylene (PP)...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014