Noncontact estimation of intercellular breaking force using a femtosecond laser impulse quantified by atomic force microscopy.

نویسندگان

  • Yoichiroh Hosokawa
  • Man Hagiyama
  • Takanori Iino
  • Yoshinori Murakami
  • Akihiko Ito
چکیده

When a femtosecond laser pulse (fsLP) is focused through an objective lens into a culture medium, an impulsive force (fsLP-IF) is generated that propagates from the laser focal point (O(f)) in a micron-sized space. This force can detach individual adherent cells without causing considerable cell damage. In this study, an fsLP-IF was reflected in the vibratory movement of an atomic force microscopy (AFM) cantilever. Based on the magnitude of the vibration and the geometrical relationship between O(f) and the cantilever, the fsLP-IF generated at O(f) was calculated as a unit of impulse [N-s]. This impulsive force broke adhesion molecule-mediated intercellular interactions in a manner that depended on the adhesion strength that was estimated by the cell aggregation assay. The force also broke the interactions between streptavidin-coated microspheres and a biotin-coated substrate with a measurement error of approximately 7%. These results suggest that fsLP-IF can be used to break intermolecular and intercellular interactions and estimate the adhesion strength. The fsLP-IF was used to break intercellular contacts in two biologically relevant cultures: a coculture of leukocytes seeded over on an endothelial cell monolayer, and a polarized monolayer culture of epithelial cells. The impulses needed to break leukocyte-endothelial and interepithelial interactions, which were calculated based on the geometrical relationship between O(f) and the adhesive interface, were on the order of 10(-13) and 10(-12) N-s, respectively. When the total impulse at O(f) is well-defined, fsLP-IF can be used to estimate the force required to break intercellular adhesions in a noncontact manner under biologically relevant conditions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Surface quality of femtosecond dissected posterior human corneal stroma investigated with atomic force microscopy.

PURPOSE To investigate and compare the surface roughness and morphology of posterior stromal lenticules created with a femtosecond laser using various pulse energies to that obtained with a mechanical microkeratome. METHODS A 150 kHz femtosecond laser platform (IntraLase iFS; Abbott Medical Optics) was programmed to create an 8.5-mm-diameter posterior stromal lenticule in 12 human corneal tis...

متن کامل

Morphological and chemical evolution on InP(100) surface irradiated with femtosecond laser

Single crystalline InP was ablated in air with p-polarized Ti:sapphire femtosecond laser at a fixed laser fluence of 82 mJ/cm. Ripples parallel to the laser polarization direction were found by scanning electron microscopy and atomic force microscopy to form for laser pulses ranging from 50 to 1000, whereas flower-like structures appeared for laser pulses of 10 and above. Analysis by X-ray phot...

متن کامل

Photoinduced electrooptics in the In2O3 nanocrystals incorporated into PMMA matrixes

We have observed an appearance of clear morphological structure in composites containing In2O3 nanocrystals (NCs) incorporated into polymethyl methacrylite (PMMA) matrices under optical treatment by a polarized femtosecond laser. The initial photoinduced treatment was carried out using a Ti:sapphire femtosecond laser emitting 140 fs p-polarized light at a maximum spectral wavelength 775 nm with...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Proceedings of the National Academy of Sciences of the United States of America

دوره 108 5  شماره 

صفحات  -

تاریخ انتشار 2011