Cu/Ba/bauxite: an Inexpensive and Efficient Alternative for Pt/Ba/Al2O3 in NOx Removal
نویسندگان
چکیده
Cu/Ba/bauxite possesses superior NOx storage and reduction (NSR) performances, high thermal stability, strong resistance against SO₂ poisoning and outstanding regeneration ability in comparison with Pt/Ba/Al₂O₃. It can serve as a cheap and promising alternative for traditional Pt/Ba/Al₂O₃ in NOx removal from lean-burn engines.
منابع مشابه
An investigation of NOx storage on Pt–BaO–Al2O3
A series of samples containing 5-wt% or 20-wt% BaO on γ-Al2O3 with different loadings of Pt were prepared and examined for their NO2 adsorption properties using temperature programmed desorption (TPD), temperature programmed reduction (TPR), and x-ray diffraction (XRD). For calcination at 873 K or above, BaO/Al2O3 formed BaAl2O4. While carbonates were found to be unstable on the aluminate phase...
متن کاملExperimental investigation of the reduction of NOx species by CO over Pt-Ba/Al2O3 Lean NOx Trap systems
Introduction Lean NOx Traps (LNTs) represent a viable solution for the abatement of NOx emissions from lean–burn engines [1]. Several studies were published on the mechanisms of both the NOx storage [1] and reduction [2], but a complete understanding of these processes has not yet been achieved. We have previously shown that on Pt-Ba/Al2O3 LNT systems the reduction of nitrates by H2 involves a ...
متن کاملBauxite-supported Transition Metal Oxides: Promising Low-temperature and SO2-tolerant Catalysts for Selective Catalytic Reduction of NOx
In order to develop low-temperature (below 200 °C) and SO2-tolerant catalysts for selective catalytic reduction (SCR) of NOx, a series of cheap M/bauxite (M = Mn, Ni and Cu) catalysts were prepared using bauxite as a support. Their SCR performances are much superior to typical V2O5/TiO2, the addition of M into bauxite results in significant promotion of NOx removal efficiency, especially at low...
متن کاملCesium as Alkali Promoter in Me-Cs (Me = Cu, Co, Fe)/ Al2O3 Structured Catalysts for the Simultaneous Removal of Soot and NOx
Structured catalysts for the simultaneous removal of soot and nitrogen oxides were prepared by means of coating cordierite monoliths with alumina-based suspensions containing Cu, Co or Fe and Cs as the catalytically active phase. Textural and chemical properties of the coated monoliths were determined by means of N2-physisorption, SEM and temperature programmed reduction. Their activity in the ...
متن کاملPt/MOx/SiO2, Pt/MOx/TiO2, and Pt/MOx/Al2O3 Catalysts for
Conventional supported Pt catalysts have often been prepared by loading Pt onto commercial supports, such as SiO2, TiO2, Al2O3, and carbon. These catalysts usually have simple metal-support (i.e., Pt-SiO2) interfaces. To tune the catalytic performance of supported Pt catalysts, it is desirable to modify the metal-support interfaces by incorporating an oxide additive into the catalyst formula. H...
متن کامل