Modeling and Identification of an Industrial Robot for Machining Applications
نویسندگان
چکیده
Industrial robots represent a promising, cost-saving and flexible alternative for machining applications. Due to the kinematics of a vertical articulated robot the system behavior is quite different compared to a conventional machine tool. This article describes the modeling of the robot structure and the identification of its parameters with focus on the analysis of the system’s stiffness and its behavior during the milling process. Therefore a method for the calculation of the Cartesian stiffness based on the polar stiffness and the use of the Jacobian matrix is introduced. Based on the results of the identification and the experimental validation the machining performance of the robot is evaluated and conclusions are drawn.
منابع مشابه
Design, Modeling, Implementation and Experimental Analysis of 6R Robot (TECHNICAL NOTE)
Design, modeling, manufacturing and experimental analysis of a six degree freedom robot, suitable for industrial applications, has been described in this paper. The robot was designed on the assumption that, each joint has an independent DC motor actuator, with gear reduction and measuring sensor for angular joint position. Mechanical design of the robot was done using Mechanical Desktop and ma...
متن کاملSaturated Neural Adaptive Robust Output Feedback Control of Robot Manipulators:An Experimental Comparative Study
In this study, an observer-based tracking controller is proposed and evaluatedexperimentally to solve the trajectory tracking problem of robotic manipulators with the torque saturationin the presence of model uncertainties and external disturbances. In comparison with the state-of-the-artobserver-based controllers in the literature, this paper introduces a saturated observer-based controllerbas...
متن کاملRobot Control Overview: An Industrial Perspective
One key competence for robot manufacturers is robot control, defined as all the technologies needed to control the electromechanical system of an industrial robot. By means of modeling, identification, optimization, and model-based control it is possible to reduce robot cost, increase robot performance, and solve requirements from new automation concepts and new application processes. Model-bas...
متن کاملRobotic machining from programming to process control: a complete solution by force control
This paper aims to present the critical issues and methodologies to improve robotic machining performance with flexile industrial robots. Design/methodology/approach – A complete solution using active force control is introduced to address various issues during the robotic machining process. Programming complex couture parts without a CAD model is made easy by using force control functions such...
متن کاملElasto-geometrical modeling and calibration of robot manipulators: Application to machining and forming applications
This paper proposes an original elasto-geometrical calibration method to improve the static pose accuracy of industrial robots involved in machining, forming or assembly applications. Two approaches are presented respectively based on an analytical parametric modeling and a Takagi-Sugeno fuzzy inference system. These are described and then discussed. This allows to list the main drawbacks and a...
متن کامل