The Procurement of the steel absorberfor the TILECAL barrel module 0
نویسندگان
چکیده
In the paper we rewiev the experience with the steel from Cold Rolling Mill Kraluv Dvur near Prague, where the steel for barrel module 0 prototype of the TILECAL calorimeter was fabricated. The measurements of the tolerances, mechanical properties and the chemical composition are presented.
منابع مشابه
Non-Compensation of the Barrel Tile Hadron Module-0 Calorimeter
The detailed experimental information about the electron and pion responses, the electron energy resolution and the e/h ratio as a function of incident energy E, impact point Z and incidence angle Θ of the Module-0 of the iron-scintillator barrel hadron calorimeter with the longitudinal tile configuration is presented. The results are based on the electron and pion beams data for E = 10, 20, 60...
متن کاملQuality Control of Wls Bers for the Tilecal/atlas Detector
It is reported the quality control of Y11(200)MS aluminized bers with 600 ppm of UV Absorber used to equip the Module 0 barrel hadronic calorimeter for ATLAS. The optical properties and the reeectivity of the aluminization of the bers is presented. Also the ber to ber uctuations of the several parameters were studied.
متن کاملAn Optical Model for the Prototype Module Performance from Bench Measurements of Components and the Test Module Response to Muons
We have developed an optical model for light collection in the TileCal geometry using bench measurement made on the individual components (clear and waveshift-ing bers, old and new production tiles) taking into account the features of the tower-by-tower readout geometry. The results of this model are in fair agreement with the light yield measured for muons at 90 taken in the May 1995 testbeam....
متن کاملCalibration of the TileCal calorimeter at the ATLAS experiment
Názov Kalibrácia hadrónového kalorimetra TileCal experimentu ATLAS Abstrakt: Diplomová práca sa zaoberá kalibráciou hadrónového kalorimetra TileCal pomocou testov na zväzkoch miónov. Zväzky miónov poskytli interkalibráciu odozvy všetkých buniek kalorimetra. Moduly TileCal kalorimetra boli primárne kalibrované rádioaktívnym zdrojom cézia a následne boli testované pomocou kalibračných zväzkov čas...
متن کاملCALIBRATION AND MONITORING OF THE TILE HADRONIC CALORIMETER OF ATLAS WITH A 137Cs SOURCE
Monitoring and intercalibration of the ATLAS TileCal is based on a hydraulically driven gamma source system. Extensive R&D has been carried out and has led to a detailed design for the full ATLAS TileCal. A prototype system has been built and tested on the Barrel and Extended Barrel modules. The realisation of the Cs source system, results concerning its performance, comparisons with other cali...
متن کامل