Modeling the Performance of the Piston Ring-Pack with Consideration
نویسندگان
چکیده
ACKNOWLEDGEMENT Table of
منابع مشابه
Interring gas dynamic analysis of piston in a diesel engine considering the thermal effect
Interring gas dynamic analysis of piston in a diesel engine considering the thermal effect. Understanding the interaction between ring dynamics and gas transport in ring pack systems is crucial and needs to be imperatively studied. The present work features detailed interring gas dynamics of piston ring pack behavior in internal combustion engines. The model is developed for a ring pack with fo...
متن کاملSimulation and Modeling of Friction Force and Oil Film Thickness in Piston Ring – Cylinder Liner Assembly of an I. C. Engine
The piston ring assembly is one of the key parts of internal combustion engine. Its performance decides engine power loss to over come friction force and determines the performance of the whole engine. As per the literature review it is reported 40 to 50 % of the total mechanical friction losses in piston ring cylinder wall interface. The present work mainly focused on study of basic tribologic...
متن کاملEffect of a ring type barrier and rotational speed on leakage flow of gas turbine brush seal
This paper investigates the effect of inserting a ring type barrier on leakage flow of brush seals with different bristles clearances (the distance between bristle pack tip and rotor surface). The ring is placed on both upstream and downstream sides of the bristles. An axisymmetric CFD model is employed to calculate radial pressure distribution along backing plate, axial pressure variation on r...
متن کاملInfluence of sliding surface roughness and oil temperature on piston ring pack operation of an automotive IC engine
In the paper a comprehensive model of a piston ring pack motion on an oil film has been presented. The local oil film thickness can be compared to height of the combined roughness of sliding surfaces of piston rings and cylinder liner. Equations describing the mixed lubrication problem based on the empirical mathematical model formulated in works of Patir, Cheng and Greenwood, Tripp have been c...
متن کاملInvestigating the effect of nanocoating on friction loss and abrasion in the piston rings
The piston ring which prepares mechanical sealing of a combustion chamber, should have significant abrasion resistance and less friction loss, using appropriate ring coating. The coating widely used is CrN, because of its good abrasion resistance at room temperature. However, it suffers from some shortcomings, such as high abrasion rate at temperatures above 200°C and lack of self-lubricating p...
متن کامل