Proactive Network Fault Detection
نویسندگان
چکیده
The increasing role of communication networks in today’s society results in a demand for higher levels of network availability and reliability. At the same time, fault management is becoming more difficult due to the dynamic nature and heterogeneity of networks. We propose an intelligent monitoring system using adaptive statistical techniques. The system continually learns the normal behavior of the network and detects deviations from the norm. Within the monitoring system, the measurements are segmented, and features extracted from the segments are used to describe the normal behavior of the measurement variables. This information is combined in the structure of a Bayesian network. The proposed system is thereby able to detect unknown or unseen faults. Experimental results on real network data demonstrate that the proposed system can detect abnormal behavior before a fault actually occurs.
منابع مشابه
Using Reinforcement Learning for Proactive Network Fault Management
For high-speed networks, it is important that fault management be proactive–i.e., detect, diagnose, and mitigate problems before they result in severe degradation of network performance. Proactive fault management depends on monitoring the network to obtain the data on which to base manager decisions. However, monitoring introduces additional overhead that may itself degrade network performance...
متن کاملOptimal Rotor Fault Detection in Induction Motor Using Particle-Swarm Optimization Optimized Neural Network
This study examined and presents an effective method for detection of failure of conductor bars in the winding of rotor of induction motor in low load conditions using neural networks of radial-base functions. The proposed method used Hilbert method to obtain the stator current signal push. The frequency and signal amplitude of the push stator were used as the input of the neural network and th...
متن کاملUAV attitude Sensor Fault Detection Based On Fuzzy Logic and by Neural Network Model Identification
Fault detection has always been important in aviation systems to prevent many accidents. This process is possible in different ways. In this paper, we first identify the longitudinal axis plane model using neural network approach. Then based on the obtained model and using fuzzy logic, the aircraft status sensor fault detection unit was designed. The simulation results show that the fault detec...
متن کاملDetection of high impedance faults in distribution networks using Discrete Fourier Transform
In this paper, a new method for extracting dynamic properties for High Impedance Fault (HIF) detection using discrete Fourier transform (DFT) is proposed. Unlike conventional methods that use features extracted from data windows after fault to detect high impedance fault, in the proposed method, using the disturbance detection algorithm in the network, the normalized changes of the selected fea...
متن کاملStator Turn-to-Turn Fault Detection of Induction Motor by Non-Invasive Method Using Generalized Regression Neural Network
Condition monitoring and protection methods based on the analysis of the machine's current are widely used according to non-invasive characteristics of current transformers. It should be noted that, these sensors are installed by default in the machine control center. On the other hand, condition monitoring based on mathematical methods has been proposed in literature. However, they are model b...
متن کاملEnhancing Survivability with Proactive Fault-Containment
Realistic survivable systems must assume that faults will occur within the system. When a malicious fault is activated, it may work to cause damage and to spread; until the system has recovered from this damage, it will have a lower degree of survivability than it did before the fault occurred. By proactively containing faults that would otherwise spread throughout the system, we can reduce the...
متن کامل