Accuracy of Measuring Camera Position by Marker Observation
نویسنده
چکیده
A lower bound to errors of measuring object position is constructed as a function of parameters of a monocular computer vision system (CVS) as well as of observation conditions and a shape of an observed marker. This bound justifies the specification of the CVS parameters and allows us to formulate constraints for an object trajectory based on required measurement accuracy. For making the measurement, the boundaries of marker image are used.
منابع مشابه
Comparative assessment of the accuracy of maximum likelihood and correlated signal enhancement algorithm positioning methods in gamma camera with large square photomultiplier tubes
Introduction: The gamma cameras, based on scintillation crystal followed by an array of photomultiplier tubes (PMTs), play a crucial role in nuclear medicine. The use of square PMTs provides the minimum dead zones in the camera. The camera with square PMTs also reduces the number of PMTs relative to the detection area. Introduction of a positioning algorithm to improve the spat...
متن کاملEvaluation of Synchronization Accuracy between High Speed Cameras in Infrared and Visible Spectrums
Availability and improvements over resent years in infrared and visible spectrum high speed cameras make their use very attractive in computer vision field. In particular, the fusion of these two cameras is utilized for analyzing physiological changes, with durations in milliseconds order. The analysis results strongly depend on the synchronization accuracy of the cameras. In this paper we pres...
متن کاملHuman Kinematics Measuring Using a High Speed Camera and Active Markers
This paper presents simple, inexpensive, and fast procedure for motion kinematics analysis and measurement [1,2]. Measurement system developed in our laboratory was based on the industrial high speed camera, an active LED markers and a PC for handling the camera and data analysis. Active markers used in this work are assembled using small and lightweight white LEDs that allow large density of m...
متن کاملBroken-ray Videometric Method and System for Measuring the Three-dimensional Position and Pose of the Non-intervisible Object
The traditional videometrics technique is usually adopted to measure the relative position and pose between the intervisible objects, and is invalid for measuring the three-dimensional position, pose and deformation of the non-intervisible target. An innovative broken-ray videometrics method is proposed to resolve the non-intervisible measurement problem. Broken-ray path is constructed by relay...
متن کاملAccuracy and repeatability of joint angles measured using a single camera markerless motion capture system.
Markerless motion capture systems have developed in an effort to evaluate human movement in a natural setting. However, the accuracy and reliability of these systems remain understudied. Therefore, the goals of this study were to quantify the accuracy and repeatability of joint angles using a single camera markerless motion capture system and to compare the markerless system performance with th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- JSEA
دوره 3 شماره
صفحات -
تاریخ انتشار 2010