Probing Stochastic Nano-Scale Inelastic Events in Stressed Amorphous Metal
نویسندگان
چکیده
One fundamental yet longstanding issue in materials science is how local inelasticity arises within an amorphous structure before yielding occurs. Although many possible scenarios were postulated or predicted by theories and simulations,however, direct experimental evidence has been lacking today due to the lack of a sensitive way to detect nano-scale inelasticity. Through the carefully designed microcompression method as coupled with the state-of-art nano-scale electric resistance measurement, we here unfold a stochastic inelastic deformation process in a Zr-based metallic glass, which takes place via the recurrence of two types of short-lived inelastic events causing structural damage and recovery, respectively, prior to yielding. Our current findings reveal that these stochastic events not only self-organize into sub-critical events due to elastic coupling, but also compete with each other in a way that enables the whole amorphous structure to self-heal as well as to sustain local damage.
منابع مشابه
Minimum voltage for threshold switching in nanoscale phase-change memory.
The size scaling of the threshold voltage required for the amorphous-to-crystalline transition in phase-change memory (PCM) is investigated using planar devices incorporating individual GeTe and Sb2Te3 nanowires. We show that the scaling law governing threshold switching changes from constant field to constant voltage scaling as the amorphous domain length falls below 10 nm. This crossover is a...
متن کاملProbing the Nature of Annealing Silicon Carbide Samples for Solar Cell
SiC powder preparation using Sol-Gel method. The size of nano-particles grows as the temperature exceeds 900° C. Size of probable agglomerations produced, is approximately less than 50nm. The surface is suitable to be used for dye solar cells. SiC emission occurs at wavelength area of 11.3μm or wave number area of 884.95 cm-1. In this paper probing the nature of annealed SiC samples in mixture,...
متن کاملDEVELOPMENT OF HARDNESS IN A Fe- BASED NANO-COMPOSITE ALLOY
Achieving extreme hardness in the newly synthetic steel formed by converting from initial amorphous state to subse-quent crystalline structure –named as devitrification process- was studied in this research work. Results of TEM observa-tions and XRD tests showed that crystallized microstructure were made up four different nano-scale phases i.e., α-Fe, Fe 36 Cr12 Mo10 , Fe 3 C and Fe3 B. More, V...
متن کاملUltrafast Microscopy: Imaging Light with Photoelectrons on the Nano-Femto Scale.
Experimental methods for ultrafast microscopy are advancing rapidly. Promising methods combine ultrafast laser excitation with electron-based imaging or rely on super-resolution optical techniques to enable probing of matter on the nano-femto scale. Among several actively developed methods, ultrafast time-resolved photoemission electron microscopy provides several advantages, among which the fo...
متن کاملBehaviour of TEM metal grids during in-situ heating experiments.
The stability of Ni, Cu, Mo and Au transmission electron microscope (TEM) grids coated with ultra-thin amorphous carbon (alpha-C) or silicon monoxide film is examined by in-situ heating up to a temperature in the range 500-850 degrees C in a transmission electron microscope. It is demonstrated that some grids can generate nano-particles either due to the surface diffusion of metal atoms on amor...
متن کامل