STUDY OF MECHANICAL PROPERTIES OF HYBRID NATURAL FIBER COMPOSITE A THESIS SUBMITTED IN PARTIAL FULFILMENT OF THE REQUIREMENT FOR THE DEGREE OF Bachelor of Technology In Mechanical Engineering
نویسندگان
چکیده
7 CHAPTER 1: INTRODUCTION 8-13 1.1: DEFINITION OF COMPOSITE 1.2: CLASSIFICATION OF COMPOSITES 1.3: HYBRID COMPOSITES 1.4: NATURAL FIBER REINFORCED COMPOSITES 1.5: APLICATIONS OF NATURAL FIBER COMPOSITES CHAPTER 2: LITERATURE SURVEY 14-18 CHAPTER 3: MATERIALS AND METHODS 19-30
منابع مشابه
Experimental Study of The Mechanical Properties of Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite
Effect of addition of filler material to the natural fiber composite was experimentally investigated. Composites are manufactured by the conventional hand-layup method. All composites are made with a fixed banana fiber with 15% weight fraction addition of different weight fraction of (0, 3, 5, 7.5%) groundnut shell ash is added to the composite. Tensile, hardness, impact and compressive strengt...
متن کاملTensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades
Recently, there has been a fast growth in research and investigation in the natural fibre composite due to the advantages of these materials, such us low environmental impact, low cost and good mechanical properties compared to synthetic fibre composites. Much effort has gone into increasing the mechanical performance and applications of natural fibes. This paper examines the mechanical propert...
متن کاملEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملAn experimental investigation of novel hybrid epoxy/glass fibers nanocomposite reinforced with nanoclay with enhanced properties for low velocity impact test
The application of nanoparticles in order to enhance the composites properties has been recently attracted many researchers' attentions. To increase the mechanical and physical properties of the composites, the nanoparticles have no significant effect on the weight and nanostructure of composites. One of the well-known nanoparticles is the Nanoclay (NC) that have been widely used in industries ...
متن کاملMechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers
Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...
متن کامل