Evaluation of Mixing Rules for Dielectric Constants of Composite Dielectrics by MC-FEM Calculation on 3D Cubic Lattice
نویسندگان
چکیده
Effective dielectric constants of diphase composite dielectrics are simulated by Monte Carlo-finite element method on three-dimensional lattice. Effective dielectric constants with coefficients of variation less than 5.5% are obtained for different ratios of dielectric constants of the two phases, ranging from 10 to 700. Various mixing rules and equations are fitted to these data and the accuracy and relevance of the fits are thoroughly examined. Modified logarithmic rule loses its physical basis when fitted to three-dimensional data. As the ratio of dielectric constants of the two phases increases, the parameters in general Lichterecker mixing rule, general Bruggeman’s symmetric equation, general effective media equation and its modified form all increase or decrease monotonously. General effective media equation and its modified form give the best fits to the effective dielectric constants simulated. The simulation results for the dielectric constants of some composite systems are in good agreement with experimental data.
منابع مشابه
Experimental and FEM Analysis of Ribs Defects on Composite Lattice Cylindrical Shells
In this study, the behavior of a composite lattice cylindrical shell is investigated in the buckling deforming. Also, the distribution of shell buckling response and the stress field is studied after making some defects on the ribs.Therefore using ANSYS software, a 3D finite element model of the shell has been created for the analysis. Material properties and geometrical data of the shell are o...
متن کاملA New Approach to Buckling Analysis of Lattice Composite Structures
Buckling strength of composite latticed cylindrical shells is one of the important parameters for studying the failure of these structures. In this paper, new governing differential equations are derived for latticed cylindrical shells and their critical buckling axial loads. The nested structure under compressive axial buckling load was analyzed. Finite Element Method (FEM) was applied to mode...
متن کاملThe Effect of Geometrical Parameters of Cylindrical Composite Lattice Structures on Buckling Behavior
Due to their light weights and high load carrying capacities, composite structures are widely used in various industrial applications especially in aerospace industry. Stiffening ribs are the main features of lattice type composite structures. Strength to weight ratio is known to be as one of the most critical design parameter in these structures. In this study, the effect of some parameters su...
متن کاملFatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel
The present paper deals with the design of experimental work matrices for two groups of experiments by using Response surface methodology (RSM). The first EDM group was dealt with the use of kerosene dielectric alone, while the second was treated by adding the graphite micro powders mixing to dielectric fluid (PMEDM). The total heat flux generated and fatigue lives after EDM and PMEDM models we...
متن کاملNew Local Composition-Equation of State Mixing Rules for High Pressure Vapor-Liquid Equilibria Using EOS/AE
In this study using Equation of State/ Helmholtz excess energy function, EOS/AE, two new local composition-Equation-of State mixing rules, LCEOS1 and LCEOS2 were developed in which the energy interaction parameters were expressed in terms of attractive and repulsive parameters of the cubic equation of state. The EOS/AE models are applied for equilibrium calculation of nat...
متن کامل