Effects of Doping Elements on the Friction and Wear of SUJ2 Steel Sliding against Aluminum Alloys
نویسندگان
چکیده
Damage to mechanical components caused by wear is considered to be an important issue for mechanical engineers. For the purpose of wear resistance, it is necessary to improve the material properties of the mechanical elements. Furthermore, low friction plays an important role in saving energy. Hence, it is important to establish a key technology for wear resistance and low friction through appropriate materials science for related industries. In general, the tribological properties of aluminum alloys are very different from those of steels. Hence, aluminum alloys should be specially considered and clarified for their tribological properties before being applied industrially. This paper therefore aims to further investigate the effects of the content of doping elements on the friction and wear of the selected aluminum alloys. From the experimental results, it can be concluded that the higher the Si content, the smaller the friction coefficient, and the milder the variation. The higher the content of iron and copper, the more materials are removed, showing better machinability. Moreover, three frictional models and wear mechanisms that describe the effects of the content of doping elements on the friction and wear are proposed. The wear mechanisms change as the silicon content increases, from the junction growth to the wedge and the ploughing particles. As a result, better choices of aluminum alloys with regards to friction and wear can then be made. These results have great practical importance.
منابع مشابه
Production of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing
In this research, surface composite layers containing nano sized TiB2, Al2O3-TiB2, ZrO2 and CNT particles have been fabricated on Aluminum alloy substrates by friction stir processing. The effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nano...
متن کاملProduction of Dispersed Ceramic Nano-Particles in Al Alloy Using Friction Stir Processing
In this research, surface composite layers containing nano sized TiB2, Al2O3-TiB2, ZrO2 and CNT particles have been fabricated on Aluminum alloy substrates by friction stir processing. The effects of different processing variables such as number of passes and strengthening particle distribution, hardness, and wear properties of surface nano...
متن کاملEffect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding
The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...
متن کاملWear and frictional mechanisms of copper-based bearing alloys
The present study investigated the role of alloy microstructure and surface roughness on wear and friction behavior of leaded and unleaded tin bronzes. Ball-on-disk experiments were carried out under dry conditions with steel balls sliding against bronze disks. Scanning electron microscopy (SEM), energy dispersive electron microscopy (EDX), x-ray photoelectron spectroscopy (XPS) and Auger elect...
متن کاملEffect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding
The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...
متن کامل