Increasing image resolution on portable displays by subpixel rendering – a systematic overview

Many of portable devices such as smart phones, portable multimedia players (PMP), and digital single-lens reflex (DSLR) cameras are capable of capturing high-resolution images (e.g. 10 mega-pixel in DSLR) or even video. The limited battery power supply in the portable devices often prevents these systems to use high-power large liquid crystal display (LCD). Instead, the portable devices often have a LCD screen with small physical size (e.g. 3 cm × 2 cm for Smartphone or DSLR) and with much lower pixel resolution (e.g. 0.15 mega-pixel for 480 × 320 display) than actual image/video resolution. Thus, the high-resolution image and video are down-sampled before being displayed. Unfortunately, the anti-aliasing filter often leads to rather severe blurring. Although the blurring may be minor when the viewing distance is large, it can be rather disturbing in portable applications due to the short viewing distance. To cope with the blurring problem, one possible solution is to use an LCD screen with higher resolution. But such hardware solution tends to be expensive and often not welcomed by the consumer electronic companies. Another possible solution is to continue to use the low-resolution LCD screen, but use some software technique to enhance the apparent image/video resolution. In this paper, we discuss a novel way to improve the apparent resolution of down-sampled image/video using a technique called subpixel rendering, which controls subpixel that is smaller than a pixel in a high-precision manner.