Decoupling Control of Bridle Rolls for Steel Mill Drive System
نویسندگان
چکیده
A decoupling controller between the tension and speed of a steel processing line is proposed for bridle rolls of the steel mill drive system. With the controller, the tension of the steel strip is kept as a reference value, regardless of the line speed variations, and the speed of the strip is also kept, regardless of the tension variations. The controller generates a torque reference of each roll driving motor according to the average roll speed and required tension, which is in contrast to the conventional controller, where one regulates line speed and the other tension. The effectiveness and the performance of the controller is verified by computer simulations and prototype experiments.
منابع مشابه
Using Experimental Procedure to Improve the Efficiency of the Two Stand Reversing Cold Mill
Production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. This is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. Initially, unsuitable surface roughness, the friction between rolls and the st...
متن کاملUsing Experimental Procedure to Improve the Efficiency of the Two Stand Reversing Cold Mill
Production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. This is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. Initially, unsuitable surface roughness, the friction between rolls and the st...
متن کاملFuzzy Multiple Stand Tension Control of a Roughing Rolling Mill
∗ Previous address: Department of Automation, Tianjin University, P. R. China Abstract In steel rolling industry, control of hot metal rolling process plays an important role in assuring high product quality and safe process operation. Although many advanced looper control technologies for finishing rolling process have emerged, looperless interstand tension control of roughing rolling mills re...
متن کاملDevelopments and Benefits from Optical Flatness Measurement in Strip Processing Lines
Flatness measurement using shape-rolls has been used in cold rolling mills for a long time. The benefit is obvious since the measured flatness profile can be used directly to control roll bending, tilt and cooling profile. It was therefore integrated in the mill control system at an early stage to control the strip shape against a target I-unit profile. However, since the flatness is also affec...
متن کاملSlab curvature compensation in a hot rolling mill by means of fuzzy control
In the flat products steel industry, the hot rolling mill transforms the incoming slabs in a thin coil which then can be processed to obtain the final products. Thickness is reduced by pulling the plate between two parallel rolls while moving the upper work roll. The effect of uneven thickness at both sides can produce deviations in the longitudinal direction of the slab, which have to be manua...
متن کامل