The effect of absorber packing height on the performance of a hybrid liquid desiccant system
نویسندگان
چکیده
A hybrid system consisting of vapour compression unit, a liquid desiccant system, and a flat solar hot water collector were designed, fabricated and tested. This combination allowed for a separate control of humidity and temperature without energy penalty. Various packing heights of the absorber component were tested to determine the optimal performance of the combined unit. A 1000 mm packing height with cross-sectional area of 600!600 mm, proved to be the best height that gives promising improvements in the coefficient of performance of the vapour compression unit. q 2005 Elsevier Ltd. All rights reserved.
منابع مشابه
Experimental Investigation of a New Enthalpy Exchanger with Low Absorbent Carryover Designed for Liquid Desiccant Dehumidification System
In this paper, the absorbent carryover effect in a designed counter-flow enthalpy exchanger is investigated. In a built prototype of the liquid desiccant dehumidifier, air and the absorbent solution are in contact and flow through a packed multi-channel polymer tower in a counter-flow pattern. To avoid the absorbent carryover, the tower is equipped with an eliminator. Experimental measurements ...
متن کاملAn investigation of heat and mass transfer enhancement of air dehumidification with addition of γ-Al2O3 nano-particles to liquid desiccant
This study introduces an experimental and theoretical investigation of the performance of a proposed air dehumidification system using a nanofluid of γ-alumina nano-particles in LiBr/H2O as a desiccant. Comparative experiments organized using a central composite design were carried out to evaluate the effects of six numerical factors (air velocity, desiccant flow rate, air humidity ratio, desic...
متن کاملDevelopment of a Pilot Plant Solar Liquid Desiccant Air Conditioner for the Northern Region of Iran
In a 10-ton capacity pilot plant solar liquid desiccant air conditioner (LDAC) developed, dehumidification of the outside air is achieved through a honeycomb packed-bed heat and mass exchanger, using lithium chloride solution as the desiccant. The dry air obtained from the dehumidification process is evaporative cooled inside a cooling pad and directed into the conditioned space. The dilute sol...
متن کاملTheoretical and Experimental Investigation of the Key Components for a Rotary Desiccant Wheel
This paper describes the theoretical and experimental investigations of the key components and also the performance analysis of a rotary wheel for using as a solid desiccant dehumidifier and also indirect evaporator cooling system. Solid desiccants have long been used in dehumidification and cooling systems for energy efficiency or reduce electricity. Although many mathematical models on th...
متن کاملExperimental Study on Performance of Modified Hybrid Liquid Membrane Process for Removal of Cadmium from Wastewater
Liquid membrane processes have attracted many interests in recent years for removal of heavy metals such as cadmium from industrial wastewaters. In this study, a modified hybrid liquid membrane system is introduced. The setup is worked by applying the water-insoluble dioctyl phthalate as the organic solvent. N-octanol and tetra butyl ammonium bromide are added to the organic phase to increase t...
متن کامل