Comparison of the DC/DC-Converters for Fuel Cell Applications
نویسنده
چکیده
The source voltage of high-power fuel cell shows strong load dependence at comparatively low voltage levels. In order to provide the voltage of 750V on the DC-link for feeding electrical energy into the mains via a three phase inverter a step-up converter with a large step-up ratio is required. The output voltage of this DC/DC-converter must be stabile during variations of the load current and the voltage of the fuel cell. This paper presents the methods and results of the calculation of the efficiency and the expense for the realization for the circuits of the DC/DC-converter that meet these requirements. Keywords—DC/DC-converter, calculation, efficiency, fuel cell.
منابع مشابه
A Novel Interleaved DC-DC Converter with Reduced Loss for Fuel Cell Vehicle Application
In this paper a novel four-leg interleaved DC-DC boost converter is proposed which is well suitable for fuel cell vehicles (FCV) application. The voltage stress of two switches of this converter is half of the conventional interleaved converters. Therefore, smaller and cheaper switches can be utilized. Also "on" state duration of the two of four switches are reduced in comparison with...
متن کاملOperation and Control of Hybrid Fuel Cell/ Energy Storage Distributed Power Generation System during voltage Sag Conditions
This paper presents a control strategy for fuel cell/energy storage power generation system during voltage sag conditions. The hybrid DC power sources are connected to grid using power electronic converters include DC-DC converter and grid connected voltage source inverter. The power from hybrid power sources is controlled during voltage sag by designing of control strategy for DC-DC converter....
متن کاملOperation and Control of Hybrid Fuel Cell/ Energy Storage Distributed Power Generation System during voltage Sag Conditions
This paper presents a control strategy for fuel cell/energy storage power generation system during voltage sag conditions. The hybrid DC power sources are connected to grid using power electronic converters include DC-DC converter and grid connected voltage source inverter. The power from hybrid power sources is controlled during voltage sag by designing of control strategy for DC-DC converter....
متن کاملAnalysis of New Transformerless dc-dc Converter With High Voltage Gain
In some industries applications such as fuel cells, we must use a high voltage gain dc-dc converters for increasing voltage, but, the conventional converters cannot provide the high voltage gain with increasing duty cycle and the converters efficiency is limited by the equivalent series resistances. For this reason, in this paper, a single switch transformerless high step-up dc-dc converter wit...
متن کاملPassivity-Based Control of the DC-DC Buck Converters in High-Power Applications
In this paper, a novel approach for control of the DC-DC buck converter in high-power and low-voltage applications is proposed. Designed method is developed according to passivity based controller which is able to stabilize output voltage in a wide range of operation. It is clear that in high-power applications, parasitic elements of the converter may become comparable with load value and hence...
متن کاملAn Intelligent Algorithm based Controller for Multiple Output DC-DC Converters with Voltage Mode Weighting Factor
Multiple output DC-DC converters are widely used in many applications such as aerospace, industrial and medical equipments. The purpose of this paper is to present an intelligent control system for the multiple output DC-DC converters. In order to perform this purpose, a double ended forward DC-DC converter with three output voltages (+5 V/ 50W, +15 V/ 45W and -15 V/ 15W) is considered and anal...
متن کامل