Effects of Short Exposure to a Simulation in a Head-Mounted Device and the Individual Differences Issue

نویسندگان

  • David Hartnagel
  • Marine Taffou
  • Patrick M. B. Sandor
چکیده

Virtual Reality (VR) displays have been developed for years; lots of technological challenges are still remaining to improve presence and hopefully avoid oculomotor trouble, eyestrain and sickness. Although the technology is not mature enough to avoid discomfort, the market already proposes devices to a large public, especially head-mounted devices. Many questions arise: Will customers adapt to those unnatural technologies? Could exposure to those kinds of devices be a public health trouble? Is it safe to drive a real vehicle afterwards? Motion sickness, simulator sickness and cyber sickness in VR are symptoms linked to a wrong (biased) multisensory integration, where visual fluxes and vestibular information are not coherent. As the VR images differ from real world by focus, anamorphic fluxes, image characteristics (rate of flickering, luminance....), vision, balance and oculomotor issues may be involved. Our concerns are focused on short time exposure (less than 10 min) to a VR display. We developed a brief test battery to quickly evaluate 3 dimensions: cognitive style using Rod and Frame Test (RFT), oculomotor modification (AC/A) and balance (vestibular tests). Here we present a pilot study to evaluate the hypothesized influence of a short time exposure to a roller coaster simulation using Oculus Rift DK1TM. Participants were tested before and after 3 cycles of roller coaster simulation, they were allowed to freely move head and body. A few number of participants asked to stop the experiment before the third cycle of roller coaster, some of the participants felt a bit uncomfortable after the exposure. Global data analysis showed no significant effect of short time exposure on a series of tests but individual differences remain.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Development of A Head Docking Device for Linac-based Stereotactic Radiosurgery System to be Installed on Neptun 10 PC Linac

Introduction:  Stereotactic  radiosurgery  is  a  technique  for  the  treatment  of  intracranial  lesions  with  highly  collimated  x-ray  beam.  Linac-based  radiosurgery  is  currently  performed  by  two  techniques:  couch or pedestal mounted. In the first technique, a device is required to affix patient's head to a couch  and  moreover  to  translate  it  accurately.  Structure  of  suc...

متن کامل

Does short-term exposure to Wi-Fi waves affect the cognitive functions of the mind?

Introduction: In recent years, we have seen a tremendous growth in communications devices, such as mobiles and tablets. Also, the appeal to connect to the Internet through wireless systems has increased significantly. Given these changes in everyday life, the approach to cognitive works and problem-solving and decision-making in a complex system that has become increasingly imp...

متن کامل

Numerical Study of Reynolds Number Effects on Flow over a Wall-Mounted Cube in a Channel Using LES

Turbulent flow over wall-mounted cube in a channel was investigated numerically using Large Eddy Simulation. The Selective Structure Function model was used to determine eddy viscosity that appeared in the subgrid scale stress terms in momentum equations. Studies were carried out for the flows with Reynolds number ranging from 1000 to 40000. To evaluate the computational results, data was compa...

متن کامل

Mathematical Simulation for the Effects of Flow Control Devices in a Six- strand Tundish in Continuous Casting of Steel Billet

The method of continuous casting of steel is now often used in the metallurgical industry, due to the increasing demand for the production of high – quality steel. An important device of continuous casting machine is the tundish, in which a stabilized steel flow has a crucial effect on the quality and efficiency conditions of the continuous casting process. In this study fluid flows in a six – ...

متن کامل

Study of Sound Levels in the Welding Centers of Babol and Its Health Effects on the Welders in 2018: A Short Report

Background and Objectives: Exposure to high levels of noise can lead to physical and psychological problems. The purpose of this study was to determine the sound level of welding centers in Babol. Materials and Methods: This descriptive study was randomly performed in 20 welding workshops in 2018. The sound level was measured by sound level meter. The researcher-made form was completed by the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017