Topology based Radial Distribution Network and its Voltage Stability Analysis
نویسندگان
چکیده
The stability index is a function of real & reactive power injected at that node as well as of node voltage. The report presents stability analysis of radial distribution networks. Two voltage stability indexes are used for identifying the node, which is most sensitive to voltage collapse. Therefore to calculate node voltages for varying operating conditions a simple load flow technique for solving radial distribution networks is used. This method involves only the
منابع مشابه
Voltage Stability Enhancement In Radial Distribution Systems By Optimal Placement Of Capacitors
In this paper, to enhance voltage stability of distribution systems, a Network Topology based load flow results are used to calculate Voltage Stability Index (VSI). Then an algorithm for capacitor placement (CP) based on this voltage stability index is implemented to determine the optimal locations, number and size of fixed and/or switched shunt capacitors for voltage stability enhancement, in ...
متن کاملCascaded Multilevel Inverter Based on Quasi-Z-Source Converter: Analysis, Design and Study of Optimal Structures
In this paper, a new topology for cascaded multilevel inverter based on quasi-Z-source converter is proposed. In the proposed topology the magnitude of output DC voltage is not limited to the sum of magnitude of DC voltage sources. Moreover, the reliability of the circuit due to capability of short circuit by Z-source network is increased. The quasi-Z- source converter in different modes is ana...
متن کاملOptimal Locating and Sizing of Unified Power Quality Conditioner- phase Angle Control for Reactive Power Compensation in Radial Distribution Network with Wind Generation
In this article, a multi-objective planning is demonstrated for reactive power compensation in radial distribution networks with wind generation via unified power quality conditioner (UPQC). UPQC model, based on phase angle control (PAC), is used. In presented method, optimal locating of UPQC-PAC is done by simultaneous minimizing of objective functions such as: grid power loss, percentage of n...
متن کاملA Hybrid Algorithm for Optimal Location and Sizing of Capacitors in the presence of Different Load Models in Distribution Network
In practical situations, distribution network loads are the mixtures of residential, industrial, and commercial types. This paper presents a hybrid optimization algorithm for the optimal placement of shunt capacitor banks in radial distribution networks in the presence of different voltage-dependent load models. The algorithm is based on the combination of Genetic Algorithm (GA) and Binary Part...
متن کاملDistributed Generation Effects on Unbalanced Distribution Network Losses Considering Cost and Security Indices
Due to the increasing interest on renewable sources in recent years, the studies on integration of distributed generation to the power grid have rapidly increased. In order to minimize line losses of power systems, it is crucially important to define the size and location of local generation to be placed. Minimizing the losses in the system would bring two types of saving, in real life, one is ...
متن کامل