Design of Coaxial fed Spiral - Slot Microstrip Patch Antenna for DTV Reception with Shorting Plates
نویسندگان
چکیده
In this paper a novel design of small sized, low profile coaxial fed microstrip patch antenna is proposed for terrestrial DTV signal reception applications in the UHF band frequency range of 540-890MHz. Designed model was spiral slot microstrip patch antenna using shorting plates for size reduction. Different parameters like return loss, VSWR, gain along θ, Ø directions, radiation pattern in 2D & 3D , axial ratio, E & H field distributions, current distributions are simulated using HFSS 13.0. The measured parameters satisfy required limits hence making the proposed antenna suitable for DTV reception applications in the UHF band. Keywordscoaxial fed, DTV, FR4, UHF
منابع مشابه
A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملWideband Stacked Square Microstrip Antenna with Shorting Plates
The impedance bandwidth of a probe-fed microstrip antenna (MSA) is inherently narrow. Therefore, many approaches to increase the bandwidth such as using additional microstrip resonators [1], stacking parasitic patches above a fed patch (stacked MSA) [2] and embedding a U-shaped slot in the radiating patch [3], etc. have been proposed. It is desirable for wideband antennas that the frequency cha...
متن کاملRectangular Microstrip Patch Antenna with Triangular Slot
This paper describes the design of Rectangular Microstrip Patch Antenna with Triangular Slot (RMPATS) at a frequency of f = 2. 4 GHz. The proposed antenna has been designed by introducing a triangular slot in the rectangular patch. The FR4-Epoxy with relative permittivity 4. 4 and height 1. 6 mm is used as substrate material. Antenna is fed by coaxial probe feed. The proposed antenna have accep...
متن کاملSuperconducting Microstrip-Fed Antenna Coupled to a Microwave Kinetic Inductance Detector
A proper antenna to couple to a microstrip Microwave Kinetic Inductance Detector (MKID) is designed and simulated. A twin-slot microstrip-fed inline antenna is designed for frequency band of 600-720~GHz integrated with an elliptical lens and coupled to the MKID. A systematic design procedure for design of such antenna with microstrip inline feeding is presented. Whole structure of lens and twin...
متن کاملCPW-Fed Circularly Polarized Slot ANTENNA with Elliptical-Shaped Patch for UWB Applications
A new design of coplanar waveguide (CPW)-fed antenna with circular polarization (CP) and excellent impedance matching is presented. In this design a pair of circular-shaped slits is applied to opposite corners of the slot for enhancing the impedance matching and realizes bandwidth of 134.43% across 2.98-15.20 GHz for VSWR≤2. Furthermore this structure exhibits axial ration bandwidth (ARBW) of 3...
متن کامل