High Pt utilization PEMFC electrode obtained by alternative ion-exchange/electrodeposition.
نویسندگان
چکیده
High Pt utilization PEMFC electrodes were prepared by an alternative ion-exchange/electrodeposition (AIEE) technique. The results demonstrated that the MEA employing an AIEE electrode with a Pt loading of 0.014 mg Pt cm(-2) exhibits performance approximately 2.2 times larger than that employing a conventional Nafion-bonded Pt/C electrode with a same Pt loading.
منابع مشابه
Electrodeposition of platinum nanoparticles on reduced graphene oxide as an efficient catalyst for oxygen reduction reaction
Reduced graphene oxide film was synthesized on a glassy carbon electrode by electro reduction of graphene oxide powders in aqueous solution. Then platinum nano particles were deposited on reduced graphene oxide film that was deposited on the glassy carbon electrode via electro reduction of platinum salt. The Physical morphology of the platinum on reduced graphene oxide film was evaluated by sca...
متن کاملHigh Performance Plasma Sputtered PdPt Fuel Cell Electrodes with Ultra Low Loading
A PdPt (10 wt% Pt) catalyst is used to replace platinum at the cathode of a PEMFC MEA whereas pure palladium is used as the anode catalyst. The catalysts are deposited on commercial carbon woven web and carbon paper GDLs by plasma sputtering. The relations between the depth density profiles, the electrode support and the fuel cell performances are discussed. It is shown that the catalyst gradie...
متن کاملHierarchical nanostructured hollow spherical carbon with mesoporous shell as a unique cathode catalyst support in proton exchange membrane fuel cell.
Hierarchical nanostructured spherical carbon with hollow macroporous core in combination with mesoporous shell has been explored to support Pt cathode catalyst with high metal loading in proton exchange membrane fuel cell (PEMFC). The hollow core-mesoporous shell carbon (HCMSC) has unique structural characteristics such as large specific surface area and mesoporous volume, ensuring uniform disp...
متن کاملPlatinum Fuel Cell Nanoparticle Syntheses: Effect on Morphology, Structure and Electrocatalytic Behavior
Because of high cost and low availability of platinum, which yet remains unavoidable as catalyst in proton exchange membrane fuel cells for achieving acceptable electric performances, numerous synthesis methods of Pt nanoparticles were developed. The decrease of the particle size in a certain extent leads to a decrease of the noble metal content in the fuel cell electrodes and also to an increa...
متن کاملEffect of Nafion and platinum content in a catalyst layer processed in a radiofrequency helicon plasma system
A helicon plasma sputtering system is used to deposit small amounts of platinum on microporous carbon support composed of Vulcan XC 72 carbon particles (known as gas diffusion layer GDL) to form Pt catalysed electrodes for proton exchange membrane fuel cells (PEMFC). Electrodes with low Pt loading are prepared, assembled in custom-made membrane electrode assemblies (MEAs) and tested for the hyd...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 46 46 شماره
صفحات -
تاریخ انتشار 2010